Retenedor para tubo gasolina y queroseno

Référence: 140/26

Kerosintank AW 139

Not available

Référence: 26/60

Kevlartank para Queroseno 1.4 l

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop.When ordering, one tank is supplied.When mounting the lid, please fix the screws cross-wise using blue loctite until you have...

Référence: 206/26

Réservoir de kérosène 2,2 l, Turbine UH-1

Kerosene Tank 2.2 l, GRP, with accessories, for UH-1D with Turbine

Référence: 10/82-100

Schlauch für Methanol 100 mOrd.No. 10/82-100

Référence: 800/26

Tank 540 ccm für Methanol

Référence: 26/30

Plongeur en feutre pour réservoir

Felt clunk pick-up 16 Ø x 26 mmfor bubbles-free suck up and constant flow ofpetrol and kerosene

Référence: 26/8

Réservoir pour Kérosène 2,5 l

Tank for kerosene, 2500 ml

Référence: 13/25

Válvula de llenado para metanol y bencina

Référence: 302/26

Réservoir pour Kérosène 1,5 l

Fuel tank for Kerosin 1,5 l

Référence: 3721

Pompe à carburant

Geared pumpfor petrol, kerosene and methanolwith accessories

Référence: 10/82-50

Schlauch für Methanol 50 mOrd.No. 10/82-50

Référence: 26/100

Benzin kit incl. fuel tank 540 ccm

Not available

Référence: 830/27

Réservoir 540 cm³ pour kérosène

Tank 540 ml, kerosene-resistantincluding accessories complying the special request of the contact with keroseneThe CofG of a model helicopter should only be checked with an empty fuel tank.During the flight the fuel is situated in a place where the additional weight does not have an adverse effect. If you set the CofG with a full fuel tank the resultant...

Référence: 26/12

Tankpendel 2 x 4 mm für Methanol

Référence: 641/26

Réservoir Air-Crane, en GFK, version pour réacteur

Component part for fuselage Air-Crane, Ord.No. 6410

Référence: 26/50

Réservoir en Kevlar 1.4 l pour Kérosène et pétrole

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside. These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop. They fit in every fuselage, that would normally use the plastic tank Ord.No. 26/5 for. For example, this Aramid tank is...