Referencia: 92/91
Rodamiento con orejuela de 6 x 10 x 3 mm
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Tanque de 540 ml para la gasolina
Política de seguridad
Política de envío
Política de devolución
Tanque de 540 ml para la gasolina
No hay reseñas de clientes en este momento.
Reference: 3741
Separate pump holder and hand wind pump, suitable for fitting to the 10 L fuel container.
Reference: 26/34
Fuel tubing is required to withstand many kinds of thermal and chemical stress, i.e. it has to be resistant to petrol and kerosene whilst maintaining maximum flexibility. However, it must also be possible to fix the tubing reliably to tubes and nipples; the more valuable the model, the more important it becomes to fix the fuel tubing with absolute...
Reference: 830/27
Tank 540 ml, kerosene-resistantincluding accessories complying the special request of the contact with keroseneThe CofG of a model helicopter should only be checked with an empty fuel tank.During the flight the fuel is situated in a place where the additional weight does not have an adverse effect. If you set the CofG with a full fuel tank the resultant...
Reference: 26/7
Tank for kerosene 2500 mlDimensions of bottle: 28.5 x 12 x 8 cm
Reference: 830/83-50
Fuel tubing for petrolapprox. 50 mtransparentFuel tubing inevitably suffers from the effects of ageing. Always replace brittle tubing before it gives problems!
Reference: 830/68
Chemical analysis used in Formel 1 is able to determine 1 g of impurity within 1 ton of oil. To fulfill your demand on the cleanness of the fuel for your model helicopter you use the fine-mesh petrol filter inside the fuel tubing between the tank and the carburettor. Also suitable for kerosine turbine fuel.
Reference: 3740
Any turbine-powered model has to carry a very large quantity of fuel, and this in turn calls for a fuel station of ample volume.The VARIO filler station has a capacity of 10 litres and is ideal for flying sessions.The fueltank is filled and drained using a practical geared pump, which is permanently mounted on the fuel container.
Reference: 412/26
dimensions: approx. 38.5 x 18 x 4.5 cm (height of the nose: 9 cm)
Reference: 830/24
Fuel tank nipple with bend, M5.Content of the package: 2 pieces
Tanque de 540 ml para la gasolina