Retenedor para tubo de combustible

Reference: 26/5

Tank for Kerosene 1.25 l

Tank for Kerosene, 1250 ml, 2 x required for the Lama

Reference: 10/66

Absperrhahn mit Feinsieb für Methanol

Reference: 26/6

Tank for kerosene 2.5 l for JetRanger PHT-3

Tank for kerosene, 2500 mlalternative fueltank, larger capacity

Reference: 830/26

Tank 540 ml for petrol

Tank 540 ml, petrol-resistantincluding the requested accessories for installation in a Benzin-Trainer or in a petrol mechanics.The CofG of a model helicopter should only be checked with an empty fuel tank.During the flight the fuel is situated in a place where the additional weight does not have an adverse effect. If you set the CofG with a full fuel...

Reference: 26/60

Kevlartank para Queroseno 1.4 l

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop.When ordering, one tank is supplied.When mounting the lid, please fix the screws cross-wise using blue loctite until you have...

Reference: 26/8

Tank for kerosene 2.5 l

Tank for kerosene, 2500 ml

Reference: 26/20

Pendelsieb für Methanol

Reference: 791/27

Internal fueltank for Cobra, 2.2 l.

The internal fueltank for our model of the Cobra enables the builder to produce a military version of the machine.The capacity of 2.2 l. gives flight times of around 12 - 14 minutes.

Reference: 13/27

Carenado de la válvula de llenado

Reference: 10/82-10

Schlauch für Methanol 10 mOrd.No. 10/82-10

Reference: 344/26

Tank für Starwood Lama

Reference: 26/3

Tank 300 ccm für Methanol/Benzin

Reference: 26/2

Rubber cap

Rubber cap useful to seal fuel lines on the pit box or fuel tank nipples pack of 4

Reference: 7/26

Tankflasche mit Zubehör

Reference: 13/32

Kerosene refuelling system

The kerosene refuelling system is sealed with a rubber nipple. The constant low pressure inside the tank draws the nipple firmly against the refuelling opening. That is also the reason why a mechanism such as a spring-controlled valve is not suitable, because the low pressure tends to push the spring back as spring tension diminishes.

Reference: 830/24

Fuel tank nipple with bend, M5

Fuel tank nipple with bend, M5.Content of the package: 2 pieces