
Referencia: 92/91
Rodamiento con orejuela de 6 x 10 x 3 mm
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
Oftmals verändert sich die Motoreinstellung analog zur Höhe des Füllstandes im Tank: der Motor "magert ab". Diesen Effekt kompensiert der kleine Zusatztank und gewährleistet so eine gleichmäßige und sichere Kraftstoffversorgung, insbesondere bei Kunstflugfiguren.
Sie montieren diesen Tank, der komplett mit Zubehör und Halter ausgeliefert wird, in Höhe des Vergasers.
No hay reseñas de clientes en este momento.
Reference: 26/50
Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside. These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop. They fit in every fuselage, that would normally use the plastic tank Ord.No. 26/5 for. For example, this Aramid tank is...
Reference: 3741
Separate pump holder and hand wind pump, suitable for fitting to the 10 L fuel container.
Reference: 3740
Any turbine-powered model has to carry a very large quantity of fuel, and this in turn calls for a fuel station of ample volume.The VARIO filler station has a capacity of 10 litres and is ideal for flying sessions.The fueltank is filled and drained using a practical geared pump, which is permanently mounted on the fuel container.
Reference: 830/26
Tank 540 ml, petrol-resistantincluding the requested accessories for installation in a Benzin-Trainer or in a petrol mechanics.The CofG of a model helicopter should only be checked with an empty fuel tank.During the flight the fuel is situated in a place where the additional weight does not have an adverse effect. If you set the CofG with a full fuel...