Varilla de empuje curvada 3.0 x 152 mm

Reference: 70/96

Gestänge 3,0 x 95 mm

Reference: 70/172

Pushrod 3.0 x 172 mm

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Reference: 70/110-2

Gestänge 2,5 x 110 mmOrd.No. 70/110-2

Reference: 70/65

Pushrod 2.5 x 65 mm

Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Content of the package: 1 piece

Reference: 89/3

Pushrod cranked, 2.5 x 100 mm

On 2-blade rotor heads with flybar the angled pushrods connect the pitch compensator with the control bridge.Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Pack of 2.

Reference: 70/120-2

Gestänge 2,5 x 120 mmOrd.No. 70/120-2

Reference: 70/150-2

Gestänge 3,0 x 150 mmOrd.No. 70/150-2

Reference: 70/101-4

Gestänge 3,0 x 100 mmOrd.No. 70/101-4

Reference: 70/116-4

Gestänge 3,0 x 115 mmOrd.No. 70/116-4

Reference: 70/83-3

Gestänge 3,0 x 83 mmOrd.No. 70/83-3

Reference: 70/116-5

Gestänge 3 x 115 mmOrd.No. 70/116-5

Reference: 70/70

Pushrod 2.5 x 70 mm

Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Content of the package: 1 piece

Reference: 70/101-3

Gestänge 3,0 x 100 mmOrd.No. 70/101-3

Reference: 70/101-5

Gestänge 3,0 x 100 mmOrd.No. 70/101-5

Reference: 70/116-2

Gestänge 3 x 115 mmOrd.No. 70/116-2

Reference: 89/1

Pushrod cranked, 2.5 x 72 mm

On 2-blade rotor heads with flybar the angled pushrods connect the pitch compensator with the control bridge.Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Pack of 2.