Sujeccion de tirante de cola 2 partes, 20mm

Reference: 834/13

Tail boom 25 x 910 mm

Not available

Reference: 309

Tail boom 20 x 0.8 x 710 mm, black

 Tail boom20 x 0.8 x 710 mmblack

Reference: 17/19

Mittenlagerungs-Set 20 mm - 3 Stück

Reference: 315/1

Tail boom 25 x 700 mm

Not available

Reference: 800/38

Führung für 25 mm Heckrohr

Reference: 268/13

Tail boom 31 x 1300 mm

Not available

Reference: 331

Tail boom 31 x 1.0 x 1200 mm, black

 Tail boom31 x 1.0 x 1200 mmblack

Reference: 840/13

Tail boom ballraced 20 x 0.8 x 780 mm, black

 Aluminium tail boom0.8 mm wall thickness20 mm outside Øballraced for 6 mm Ø stainless steel drive shaft, 17/16

Reference: 21/4

Pushrod - CFK 4.0 x 1000 mm carbon fibre

Reference: 321

Tail boom 25 x 0.8 x 910 mm, black

 Tail boom25 x 0.8 x 910 mmblack

Reference: 834/70

Tail boom holder, 25 mm

A 2-part GRP tail boom holder keeps a firm hold on the 25 mm ��tail boom. The tail boom holder is screwed between the side frames with socket-head cap screws M 3 x 55 (Ord.No. 90135).

Reference: 21/25

Kohlefaser-Set für 25 mm

Reference: 8/6

Heckservo-Halter 20 mm

Reference: 831/13

Tail boom ballraced 20 x 0.8 x 900 mm, titanium

 Aluminium tail boom0.8 mm wall thickness20 mm outside Øballraced for 6 mm Ø stainless steel drive shaft, 17/16

Reference: 313

Tail boom 20 x 0.5 x 790 mm, black

 Tail boom20 x 0.5 x 790 mmblackweight 59 gTail booms with a wall thickness of 0.5 mm are specially tested for the use in models with electric drive only and must not be used for models powered by combustion engines! The wall thickness is just 0.5 mm for the reduction of weight. Comparative, the weight of a tail boom with 0.8 x 20 x 790 mm is 109 g.

Reference: 8/5

Heckservo-Halter 25 mm