Bell with Prisioneros de

Riferimento: 870/3

Heckrotorhalter, Alu

Riferimento: 8/5

Heckservo-Halter 25 mm

Riferimento: 21/5

CFK-Steuerstange 4,0 x 1350 mm

Riferimento: 860/13

Braccio di coda ballraced 25 x 0,8 x 840

 Aluminium tail boom0.8 mm wall thickness25 mm outside Øballraced for 6 mm Ø stainless steel drive shaft, 17/16

Riferimento: 830/13

Braccio di coda ballraced 20 x 0,8 x 810 mm, titanio

 Aluminium tail boom0.8 mm wall thickness20 mm outside Øballraced for 6 mm Ø stainless steel drive shaft, 17/16

Riferimento: 321

Braccio di coda da 25 x 0,8 x 910 mm, nero

 Tail boom25 x 0.8 x 910 mmblack

Riferimento: 21/15

Kohlefaser-Set für 20 mm

Riferimento: 17/64

O-Ring 19 x 2 mm

Riferimento: 319

Braccio della coda di 25 x 0,8 x 790 mm, argento

 Tail boom25 x 0.8 x 790 mmsilver

Riferimento: 907/2

Servo mount

Use this special servo mount for installing the throttle servo on the base plate.

Riferimento: 313

Braccio di coda di 20 x 0,5 x 790 mm

 Tail boom20 x 0.5 x 790 mmblackweight 59 gTail booms with a wall thickness of 0.5 mm are specially tested for the use in models with electric drive only and must not be used for models powered by combustion engines! The wall thickness is just 0.5 mm for the reduction of weight. Comparative, the weight of a tail boom with 0.8 x 20 x 790 mm is 109 g.

Riferimento: 800/13

Tubo di coda in alluminio 20 x 0,8 x 780

 Aluminium tail boom0.8 mm wall thickness20 mm outside Øwith guides for 2 mm tail rotor shaft.

Riferimento: 310

Braccio di coda di 20 x 0,8 x 810 mm, titanio

 Tail boom20 x 0.8 x 810 mmtitanium

Riferimento: 831/13

Braccio di coda sormontato da 20 x 0,8 x 9

 Aluminium tail boom0.8 mm wall thickness20 mm outside Øballraced for 6 mm Ø stainless steel drive shaft, 17/16

Riferimento: 322

Braccio della coda di 20 x 0,8 x 780 mm, blue

 Tail boom20 x 0.8 x 780 mmblue

Riferimento: 139/13

Barra di coda 25 x 910 mm

Not available