Mecanica electrica

Reference: 139/22

Electric mechanics Agusta AW 139

Without motor and petrol components (see Ord.No. 26/100).

Reference: 1002/7

Mechanics set X-Treme

Not available

Reference: 121/22

EC 120 Electric Dome Mechanics

Specially developed for the EC 120 are these Dome mechanics.Easy to assemble.No separate upper support mechanism necessary.Solid construction with angled side walls for maximum rigidity.Designed for mounting a Kontronik Pyro 800.

Reference: 632/22 E

Electric mechanics for Schweizer 300

Petrol mechanics designed to be used with the larger Vario Schweizer 300 (Ord.No. 6032)Without motor and petrol components (see Ord.No. 26/100).

Reference: 1002/77

Electric mechanics (turbine PHT3-L)

These mechanics can be used in all fuselages that are designed for the JetCat PHT3-L or Vario Turbine mechanics Ord.No. 1002/67.You will need to order the Motor pulley gear seperatley to achieve the required rotor rpm....Motor Pulley Ord.No.42 teeth, 850 rpm, 4-blade 2300 mm Ord.No. 500/4144 teeth, 885 rpm, 3-blade 2300 mm Ord.No. 500/4348 teeth, 960 rpm,...

Reference: 1002/1200

Electric mechanics XL

Brand new dome mechanics which is especially designed for the scale model electric flight and allows full cockpit detail. This mechanics is suitable for fuselage kit Ord.No. 1112. Electric motors are quiet, low in vibration, without exhaust gases and residual thrust. The blade slap noise of the rotor blades is more noticeable than with other types of...

Reference: 1002/82

Electric mechanics, excl. motor, 12 mm main shaft

Reference: 1002/3

Mechanics set X-Treme with Fenestron RH

Not available

Reference: 1002/15

Electric "Skyfox" mechanics

Including metal internal tooth gear!These are the electric Skyfox mechanics which are used with one of the following conversion sets for the required gear ratio.Mechanics excludes motor, motor mount, and motor gears... see below.Following the trend for electric models, Vario have produced an electric conversion set for the popular Skyfox mechanics. The...

Reference: 1002/80

Electric mechanics, excl. motor, 10 mm mainshaft

Reference: 1002/76

Electric mechanics (fit as JetCat PHT-3)

These mechanics can be used in all fuselages that are designed for the Turbine mechanics PHT-3.Mounting is similar to Ord.No. 1002/67.

Reference: 1002/78

Electric mechanics (turbine PHT3-3)

These mechanics can be used in all fuselages that are designed for the JetCat PHT3-3 or Vario Turbine mechanics Ord.No. 1002/68.You will need to order the Motor pulley gear seperatley to achieve the required rotor rpm....Motor Pulley Ord.No.42 teeth, 850 rpm, 4-blade 2300 mm Ord.No. 500/4144 teeth, 885 rpm, 3-blade 2300 mm Ord.No. 500/4348 teeth, 960 rpm,...

Reference: 950/22

Exec mechanics

This mechanical system has been developed specifically for the Exec, so that the model helicopter can be fitted wth an electric power system.It is designed for a 2-blade main rotor.

Reference: 1002/9

Mechanics set X-Treme with Fenestron RH

Not available

Reference: 1002/34

Mechanics MD 902

Not available

Reference: 1002/4

Mechanics set X-Treme

Not available