Set mecanica X-Treme 10.1 : 1 , giro derecha

Référence: 1002/34

Mechanics MD 902

Not available

Référence: 950/22

Exec mechanics

This mechanical system has been developed specifically for the Exec, so that the model helicopter can be fitted wth an electric power system.It is designed for a 2-blade main rotor.

Référence: 1002/1

Electric mechanics

Référence: 1002/1200

Electric mechanics XL

Brand new dome mechanics which is especially designed for the scale model electric flight and allows full cockpit detail. This mechanics is suitable for fuselage kit Ord.No. 1112. Electric motors are quiet, low in vibration, without exhaust gases and residual thrust. The blade slap noise of the rotor blades is more noticeable than with other types of...

Référence: 1002/78

Electric mechanics (turbine PHT3-3)

These mechanics can be used in all fuselages that are designed for the JetCat PHT3-3 or Vario Turbine mechanics Ord.No. 1002/68.You will need to order the Motor pulley gear seperatley to achieve the required rotor rpm....Motor Pulley Ord.No.42 teeth, 850 rpm, 4-blade 2300 mm Ord.No. 500/4144 teeth, 885 rpm, 3-blade 2300 mm Ord.No. 500/4348 teeth, 960 rpm,...

Référence: 1002/76

Electric mechanics (fit as JetCat PHT-3)

These mechanics can be used in all fuselages that are designed for the Turbine mechanics PHT-3.Mounting is similar to Ord.No. 1002/67.

Référence: 1002/4

Mechanics set X-Treme

Not available

Référence: 121/22

EC 120 Electric Dome Mechanics

Specially developed for the EC 120 are these Dome mechanics.Easy to assemble.No separate upper support mechanism necessary.Solid construction with angled side walls for maximum rigidity.Designed for mounting a Kontronik Pyro 800.

Référence: 305/24

Electric mechanics Lama 1.80 m

- true-to-original mechanics especially for fuselage Ord.No. 3005- low noise level because of belt gear stage and spiral-toothed plate gear stage- true-to-original swashplate linkage

Référence: 429/22

Mechanics for Bell 429

Référence: 1002/7

Mechanics set X-Treme

Not available

Référence: 1002/84

Electric mechanics with Fenestron, 10 mm main shaft

Fenestron electric mechanics with 10 blade Fenestron for H135 (EC135 Ord.Nr. 1320)

Référence: 1002/36

Mechanics for Air-Crane

Not available

Référence: 342/23

Electric mechanics Gazelle

Not available

Référence: 1382/22

Electric mechanics for EC 135

Not available

Référence: 1002/80

Electric mechanics, excl. motor, 10 mm mainshaft