Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Polvo Combine Speedy
Política de seguridad
Política de envío
Política de devolución
Polvo Combine Speedy
No hay reseñas de clientes en este momento.
Riferimento: 27/10
UHU plus endfest 300 is a high-quality two-pack epoxy-based adhesive. The adhesive can be worked for two hours at room temperature, and develops an enormous strength of 300 kg / sq.cm. Suitable for bonding all materials, excellent with metal, wood and plastic; particularly capable for installing tail drive tubes. Pack of 33 g
Riferimento: 10/29
For use with low or high viscosity cyano glue. Spray thinly over the glued joint and it sets the glue immediately. Content: 200 ml
Riferimento: 10/128
Fast curing agent, odorless, no blooming, hardly susceptible to the influence of moisture, for fine-and coarse-pored polystyrene suitable.
Riferimento: 11/40
A Loctite pin is an essential tool for every workshop. Using the pin it is easy to apply the quantity of fluid you need in small threaded holes. The pin is chrome-plated so that the fluid can easily be wiped off again. Pin with 10 ml tread-lock fluid, medium-strength
Riferimento: 10/126
Fast curing, black, rubber-filled adhesive, ideal for rubber or plastic bonds.Content: 20 g
Riferimento: 10/123
Optimal durable resin, ideally suited to build model helicopters, whether it is to stick a wooden frame or to join GRP parts. For better processing, we recommend mixing the resin with Poxan (Ord No. 623) to thicken.
Riferimento: 10/125
"Instant" cyano-acrylate adhesives ("cyano") are high-strength glues which join materials of all types. Low viscosity (thin) for fine cracks and close-fitting joints; high viscosity (thick) for larger-area joints. Content: 20 g
Riferimento: 10/11
This clear, fast-drying silicone rubber sealant does not contain acid solvents. This is particularly important when gluing glazing panels in place, as it does not attack the transparent or painted surfaces! Electronic components such as gyros and servos can be glued in place with this material for an absolutely secure but vibration-damping fixing. Because...
Riferimento: 16/10
This extra-light weight, white filler paste is ideal for repairs and improvements to GRP fuselages. The 2-pack paste sets in 12 minutes (keeps its elasticity making it flexible and hard to break!) and can be rubbed down immediately afterwards. 2-pack filler pastewhite242 g filler and 8 g hardener
Riferimento: 10/23
Use thread-lock fluid to prevent screws loosening themselves through vibrations.If you wish to use it on a screw please note the difference between types: medium-strength "blue" can be released again if the correct tool is used. High-strength "green" adheres so firmly that the joint can only be released by applying heat, and with plastic parts this could...
Riferimento: 10/3
UHU plus endfest 300 is a high-quality two-pack epoxy-based adhesive. The adhesive can be worked for two hours at room temperature, and develops an enormous strength of 300 kg/sq.cm. Suitable for bonding all materials, excellent with metal, wood and plastic; particularly capable for installing tail drive tubes. Pack of 54.4 g
Riferimento: 10/13
L530 is the adhesive to use for joining soft, flexible plastics to each other and to other materials. Components made of PVC, polystyrene, celluloid etc. adhere well, as do plastic scale detail fittings. We use this adhesive also for canopies, since it guarantees a hard but flexible gluing.Plastic adhesivecrystal clearalso useful for glazing sets
Riferimento: 10/127
"Instant" cyano-acrylate adhesives ("cyano") are high-strength glues which join materials of all types. Low viscosity (thin) for fine cracks and close-fitting joints; high viscosity (thick) for larger-area joints. Content: 20 g
Riferimento: 108/6
Glas cloth is ideal for the repair of GFK parts; also perfect to reinforce trainer canopies should a repair be nessesary. Dimension: approx. 50 x 500 mm
Riferimento: 24/10
Use thread-lock fluid to prevent screws loosening themselves through vibrations.If you wish to use it on a screw please note the difference between types: medium-strength "blue" can be released again if the correct tool is used. High-strength "green" adheres so firmly that the joint can only be released by applying heat, and with plastic parts this could...
Polvo Combine Speedy
