

No brand
Référence: 2017 E
Référence: 34/30
Tail rotor bladesSpecification 8.0 mm blade root8.7 g approx.29 mm blade chord5.0 mm profile thicknesssymmetrical130 mm longbalanced1 pair
Référence: 10/90
The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...
Component part for a multi-blade rotor head for 10 mm or 12 mm Ø main shaft.
Política de seguridad
Política de envío
Política de devolución
Component part for a multi-blade rotor head for 10 mm or 12 mm Ø main shaft.
Aucun avis n'a été publié pour le moment.
Reference: 76/9
Blade holder arm, aluminium. Content of the package: 1 piece.
Reference: 54/13
On longer rotor shafts the clamp ring for the pitch compensator sits underneath of the centre piece directly on the rotor shaft.Clamp ring for pitch compensator 10 mm Ø, length of the pin 30 mm.
Reference: 80/30
Control bridge 2-part metal, for 5 mm ∅ flybar.
Reference: 702/15
Aluminium centre piece for 15 mm Ø main shaft
Reference: 71 A
Centre piece for pitchcompensator, GFK, alone.
Reference: 832/75
Thrust washer for rotor head Content of the package: 2 pieces
Reference: 832/71
Pitch mixer centre piece, aluminium, 12 mm Ø
Reference: 707
The diameter is 83 mm and the construction height from the screw-on surface to the highest point is 13 mm.It is fastened using an M4 x 14 hexagon socket screw (included).
Reference: 79/13
The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.
Reference: 74/18
O-ring 2 x 19 mm soft Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.
Reference: 76/19
As demands on helicopters continue to rise, so stronger blade holders are required. In this case a 14 mm blade holder is combined with a 5 mm Ø hole for blade retention, i.e. the matching blade holder screws and self-locking nuts are M5 in size.GRP blade holder with short linkage armfor multi-blade rotor heads
Reference: 79/21
The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.
Component part for a multi-blade rotor head for 10 mm or 12 mm Ø main shaft.