Accueil
Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Inertia weights for Ø 5 mm flybar

79/8
Note 

Inertia weights are small "extra brakes".
They increase the gyroscopic stability of the flybar and slow down the rotor head's response.
For every beginner we recommend these so the responsiveness of the rotor head is reduced. The rotor head becomes more responsive as the inertia weights are moveded inwards (always place equally!).

Inertia weights suitable for 5mm flybars; complete set for one rotor head, including hardware.

30,60 €
TTC
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

Inertia weights are small "extra brakes".
They increase the gyroscopic stability of the flybar and slow down the rotor head's response.
For every beginner we recommend these so the responsiveness of the rotor head is reduced. The rotor head becomes more responsive as the inertia weights are moveded inwards (always place equally!).

Inertia weights suitable for 5mm flybars; complete set for one rotor head, including hardware.

Détails du produit
79/8
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Inertia weights for Ø 5 mm flybar

Inertia weights for Ø 5 mm flybar

Inertia weights are small "extra brakes".
They increase the gyroscopic stability of the flybar and slow down the rotor head's response.
For every beginner we recommend these so the responsiveness of the rotor head is reduced. The rotor head becomes more responsive as the inertia weights are moveded inwards (always place equally!).

Inertia weights suitable for 5mm flybars; complete set for one rotor head, including hardware.

Donnez votre avis
16 autres produits dans la même catégorie :
Clamp ring for 12 mm Aperçu rapide

Référence: 54/18

Clamp ring for 12 mm

Commentaire(s): 0

Same design as clamp ring 54/13, but for 12 mm Ø main rotor shaft.Clamp ring for pitch compensator 12 mm Ø, length of the pin 40 mm.

Prix 30,60 €
Détails
En vente sur demande
Conversion set for Delta head Aperçu rapide

Référence: 1005/6

Conversion set for Delta head

Commentaire(s): 0

In the world of full-size helicopters the Delta effect is universally acknowledged. For model helicopter rotors we have emulated the effect as closely as possible.As soon as a rotor blade is pushed out of its path by some external influence (thermal, down draught etc.) the opposite blade counters the movement and thereby subdues the rotor disc.Conversion...

Prix 176,40 €
Détails
En vente sur demande
Mixer lever cranked Aperçu rapide

Référence: 78/41

Mixer lever cranked

Commentaire(s): 0

Mixer lever, content of the package 1 piece.Additionial accessories for the use of mixer levers are either two flanged ballraces or two flanged bushes from Delrin as a low cost alternative. The screwing on the blade holder arm complies with the kind of hole, i.e. it depends on the through hole or on the blind hole. Please note for choosing the screws:...

Prix 17,00 €
Détails
En vente sur demande
Barre de Bell inox 4 x 600 mm Aperçu rapide

Référence: 79/15

Barre de Bell inox 4 x 600 mm

Commentaire(s): 0

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Prix 19,40 €
Détails
En vente sur demande
GRP blade holder, 22 mm... Aperçu rapide

Référence: 702/76

GRP blade holder, 22 mm blade throat

Commentaire(s): 0

This blade holder was specially developed for the large Bell 47 G III with a rotor diameter of 2.36 m. It has a 22 mm blade throat and a 6 mm Ø bore for the retaining screw, i.e. the matching blade holder screws and self-locking nuts are M6 in size.

Prix 37,80 €
Détails
En vente sur demande
Chape double 90° Aperçu rapide

Référence: 87/4

Chape double 90°

Commentaire(s): 0

A 90° twisted double ball-link connect the mixer lever to the ball collet on the flybar. Content of the package: 2 pieces

Prix 11,20 €
Détails
En vente sur demande
Rotor brake, GRP Aperçu rapide

Référence: 72/4

Rotor brake, GRP

Commentaire(s): 0

When you have landed and stopped the engine, the rotor head continues spinning for quite some time until it stops by itself. A rotor brake shortens the time you have to wait. Using light pressure with the flat of your hand on the domed face of the rotor brake you can stop the rotor in a few moments.Please note: stay in safe distance away from the turning...

Prix 14,70 €
Détails
En vente sur demande

Suivez-nous sur Facebook