Marques

No brand

Fournisseurs

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

GRP blade holder, 5 mm ∅ hole

76/16
Note 

As demands on helicopters continue to rise, so stronger blade holders are required.
In this case a 14 mm blade holder is combined with a 5 mm Ø hole for blade retention, i.e. the matching blade holder screws and self-locking nuts are M5 in size.

  • GRP blade holder
  • with long linkage arm
  • for two-blade rotor heads
30,60 €
TTC
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

As demands on helicopters continue to rise, so stronger blade holders are required.
In this case a 14 mm blade holder is combined with a 5 mm Ø hole for blade retention, i.e. the matching blade holder screws and self-locking nuts are M5 in size.

  • GRP blade holder
  • with long linkage arm
  • for two-blade rotor heads
Détails du produit
76/16
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

GRP blade holder, 5 mm ∅ hole

GRP blade holder, 5 mm ∅ hole

As demands on helicopters continue to rise, so stronger blade holders are required.
In this case a 14 mm blade holder is combined with a 5 mm Ø hole for blade retention, i.e. the matching blade holder screws and self-locking nuts are M5 in size.

  • GRP blade holder
  • with long linkage arm
  • for two-blade rotor heads
Donnez votre avis
16 autres produits dans la même catégorie :

Référence: 87/4

Chape double 90°

Commentaire(s): 0

A 90° twisted double ball-link connect the mixer lever to the ball collet on the flybar. Content of the package: 2 pieces

Prix 11,20 €
Détails
En vente sur demande

Référence: 79/21

Flybar stainless steel 4 x 320 mm

Commentaire(s): 0

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Prix 17,00 €
Détails
En vente sur demande

Référence: 79/13

Flybar stainless steel 4 x 560 mm

Commentaire(s): 0

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Prix 19,40 €
Détails
En vente sur demande

Référence: 480/53

Co-rotating dome coverage-set

Commentaire(s): 0

You can fit to your Chinook heads a plate each that covers the dome and spins with the rotor head rpm. A pretty detail, that also can be found on the original Chinook helicopters. The plates / dome covers are mounted on the clamp rings of the main shafts.Pack of 2 plates incl. mounting material

Prix 176,40 €
Détails
En vente sur demande

Référence: 74/11

O-ring 1,5 x 11 mm soft

Commentaire(s): 0

O-ring 1,5 x 11 mm soft Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Prix 6,30 €
Détails
En vente sur demande

Référence: 117/20

Thrust bearing set complete

Commentaire(s): 0

The standard version of our mechanics includes ground thrust bearing shafts with a of 8 mm Ø and a length of 110 mm.Thrust bearings absorb the high centrifugal forces exerted by the main rotor blades. The effect of the axial bearings is retained in full when the blade holders rotate.Thrust bearing set, complete as shown.

Prix 54,60 €
Détails
En vente sur demande

Référence: 72/4

Rotor brake, GRP

Commentaire(s): 0

When you have landed and stopped the engine, the rotor head continues spinning for quite some time until it stops by itself. A rotor brake shortens the time you have to wait. Using light pressure with the flat of your hand on the domed face of the rotor brake you can stop the rotor in a few moments.Please note: stay in safe distance away from the turning...

Prix 14,70 €
Détails
En vente sur demande

Référence: 72/42

CFRP plates for aluminium hub

Commentaire(s): 0

This rotor head hub with its bonded-in carbon fibre plates is a real head-turner. The plates are simply glued into the existing recesses on both sides. We recommend silicone rubber, Ord.No. 10/11, as adhesive.CFRP plates for aluminium hub matching Ord.No. 832/72pack quantity: 2 plates

Prix 17,00 €
Détails
En vente sur demande

Suivez-nous sur Facebook