

No brand
Référence: 2017 E
Référence: 34/30
Tail rotor bladesSpecification 8.0 mm blade root8.7 g approx.29 mm blade chord5.0 mm profile thicknesssymmetrical130 mm longbalanced1 pair
Référence: 10/90
The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...
O-ring 3 x 16 mm soft
Content of the package: 8 pieces
Tip: O-rings always slide with a drop of silicone oil onto the shaft.
Política de seguridad
Política de envío
Política de devolución
O-ring 3 x 16 mm soft
Content of the package: 8 pieces
Tip: O-rings always slide with a drop of silicone oil onto the shaft.
Aucun avis n'a été publié pour le moment.
Référence: 78/45
These mixer levers from aluminium are particularly torsion proof and feature an improved control precision. For individual settings you can change the connection of the linkage (relocate the balls).Flanged bearings 3 x 7 x 3 mm are suitable also, i.e. you use existing ballraces again.Place of installation: all rotor heads which are provided with the...
Référence: 702/76
This blade holder was specially developed for the large Bell 47 G III with a rotor diameter of 2.36 m. It has a 22 mm blade throat and a 6 mm Ø bore for the retaining screw, i.e. the matching blade holder screws and self-locking nuts are M6 in size.
Référence: 79/15
The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.
Référence: 71/18
Content of the package2 pieces
Référence: 87/20
The connection between mixer lever and variable rocker is carried out by an actuating lever, triple ballraced. Content of the package: 2 pieces
Référence: 76/8
Ballrace spacer, steel Content of the package: 1 piece.
Référence: 117/20
The standard version of our mechanics includes ground thrust bearing shafts with a of 8 mm Ø and a length of 110 mm.Thrust bearings absorb the high centrifugal forces exerted by the main rotor blades. The effect of the axial bearings is retained in full when the blade holders rotate.Thrust bearing set, complete as shown.
Référence: 707
The diameter is 83 mm and the construction height from the screw-on surface to the highest point is 13 mm.It is fastened using an M4 x 14 hexagon socket screw (included).
Référence: 68/22
Aluminium side frames for swashplate driver 68/20 and 68/50. Content of the package: 2 pieces
Référence: 832/87
A 90° twisted double ball-link connect the mixer lever to the ball collet on the flybar, suitable for the rotor head 722/72.Content of the package: 2 pieces
Référence: 76/20
On all 2-blade rotor heads up to 1800 mm rotor disc different blade holders can be mounted.Blade holder set, for one blade holder
O-ring 3 x 16 mm soft
Content of the package: 8 pieces
Tip: O-rings always slide with a drop of silicone oil onto the shaft.