

No brand
Référence: 2017 E
Référence: 97/4
When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only). When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod...
O-ring 2 x 19 mm soft
Content of the package: 8 pieces
Tip: O-rings always slide with a drop of silicone oil onto the shaft.
Política de seguridad
Política de envío
Política de devolución
O-ring 2 x 19 mm soft
Content of the package: 8 pieces
Tip: O-rings always slide with a drop of silicone oil onto the shaft.
Aucun avis n'a été publié pour le moment.
Reference: 704/31
Item to a multi-blade rotor head for Ø 10 mm shaft; see Ord.No. 703/30, 704/30 and 705/30.
Reference: 82/53
Washer 3.5 x 12 x 3 mm, rubber Content of the package: 2 pieces
Reference: 82/9
When you use a speed regulator you put the magnets into the cut-outs of this clamp ring. Clamp ring for speed collection, 10 mm Ø.
Reference: 78/40
Mixer levers are an essential part of every flybar-controlled rotor head. From the swashplate a pushrod runs to the ballraced mixer arm which is screwed to the blade holder arm. The mixer levers transmit the control movement to the flybar via the double ball-link.Additionial accessories for the use of mixer levers are either two flanged ballraces or two...
Reference: 74/19
O-ring 1.5 x 19 mm soft Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.
Reference: 54/13
On longer rotor shafts the clamp ring for the pitch compensator sits underneath of the centre piece directly on the rotor shaft.Clamp ring for pitch compensator 10 mm Ø, length of the pin 30 mm.
Reference: 71/56
Pitch mixer centre piece, aluminium, 12 mm Ø
O-ring 2 x 19 mm soft
Content of the package: 8 pieces
Tip: O-rings always slide with a drop of silicone oil onto the shaft.