Accueil
Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Aluminium side frames

68/22
Note 



Aluminium side frames for swashplate driver 68/20 and 68/50.

Content of the package: 2 pieces

30,60 €
TTC
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description



Aluminium side frames for swashplate driver 68/20 and 68/50.

Content of the package: 2 pieces

Détails du produit
68/22
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Aluminium side frames

Aluminium side frames



Aluminium side frames for swashplate driver 68/20 and 68/50.

Content of the package: 2 pieces

Donnez votre avis
16 autres produits dans la même catégorie :
Barre de Bell inox 4 x 600 mm Aperçu rapide

Référence: 79/15

Barre de Bell inox 4 x 600 mm

Commentaire(s): 0

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Prix 19,40 €
Détails
En vente sur demande
GRP blade holder, 5 mm ∅ hole Aperçu rapide

Référence: 76/16

GRP blade holder, 5 mm ∅ hole

Commentaire(s): 0

As demands on helicopters continue to rise, so stronger blade holders are required. In this case a 14 mm blade holder is combined with a 5 mm Ø hole for blade retention, i.e. the matching blade holder screws and self-locking nuts are M5 in size.GRP blade holder with long linkage armfor two-blade rotor heads

Prix 30,60 €
Détails
En vente sur demande
Flybar stainless steel 4 x... Aperçu rapide

Référence: 79/13

Flybar stainless steel 4 x 560 mm

Commentaire(s): 0

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Prix 19,40 €
Détails
En vente sur demande
GRP blade holder, 22 mm... Aperçu rapide

Référence: 702/76

GRP blade holder, 22 mm blade throat

Commentaire(s): 0

This blade holder was specially developed for the large Bell 47 G III with a rotor diameter of 2.36 m. It has a 22 mm blade throat and a 6 mm Ø bore for the retaining screw, i.e. the matching blade holder screws and self-locking nuts are M6 in size.

Prix 37,80 €
Détails
En vente sur demande
Ball-collet with double ball Aperçu rapide

Référence: 832/66

Ball-collet with double ball

Commentaire(s): 0

The use of ball-collets makes it possible to attach double ball-links to the flybar; this automatically sets the correct rocker spacing. The double-ball on these ball-collets also provides an adjustment facility for the VR-22 rotor head, as the double ball-link can always be set vertical by connecting it to the inside or outside ball - provided that the...

Prix 37,50 €
Détails
En vente sur demande
Kit mélangeurs Aperçu rapide

Référence: 78/40

Kit mélangeurs

Commentaire(s): 0

Mixer levers are an essential part of every flybar-controlled rotor head. From the swashplate a pushrod runs to the ballraced mixer arm which is screwed to the blade holder arm. The mixer levers transmit the control movement to the flybar via the double ball-link.Additionial accessories for the use of mixer levers are either two flanged ballraces or two...

Prix 37,50 €
Détails
En vente sur demande
Clamp ring for 12 mm Aperçu rapide

Référence: 54/18

Clamp ring for 12 mm

Commentaire(s): 0

Same design as clamp ring 54/13, but for 12 mm Ø main rotor shaft.Clamp ring for pitch compensator 12 mm Ø, length of the pin 40 mm.

Prix 30,60 €
Détails
En vente sur demande

Suivez-nous sur Facebook

Facebook