Palettes

Reference: 76/15

GRP blade holder reinforced

Blade holder, GRP, reinforced

Reference: 79/10

Flybar stainless steel 4 x 510 mm

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Reference: 79/15

Flybar stainless steel 4 x 600 mm

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Reference: 78/45

Mixer lever set, aluminium

These mixer levers from aluminium are particularly torsion proof and feature an improved control precision. For individual settings you can change the connection of the linkage (relocate the balls).Flanged bearings 3 x 7 x 3 mm are suitable also, i.e. you use existing ballraces again.Place of installation: all rotor heads which are provided with the...

Reference: 71/20

Collective pitch compensator 10 mm ∅

Pitch compensator, complete, for 10 mm ∅ main shaft, centre piece GRP

Reference: 71/9

Balance weight ∅ 4 mm

Balance weight ∅ 4 mm approx. 7 g Content of the package 2 pieces

Reference: 74/6

O-ring 2 x 6 mm soft

O-ring 2 x 6 mm soft Content of the package: 8 piecesTip: O-rings always slide with a drop of silicone oil onto the shaft.

Reference: 702/97

Linkage ball

Not available

Reference: 76/8

Ballrace spacer, steel

Ballrace spacer, steel Content of the package: 1 piece.

Reference: 702/92

Rotor head balance weight Bell 47 black

Not available

Reference: 87/12

Doble bola-link para Delta rotor

Reference: 707/6

Rotor head cover for 4-blade head

Not available

Reference: 74/5

O-ring 3 x 7 mm soft

O-ring 3 x 7 mm soft Content of the package: 4 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Reference: 73/20

Thrust bearing shaft 8 x 101 mm, tubular

 Thrust bearing shaft "tubular"27.8 g, 8 mm Ø, 101 mm longonly for Electro rotor head and in use with the model helicopter Silence!

Reference: 71/28

Curved link, with pin

Curved link, with pin

Reference: 85/1

Spacer 4 x 6 x 1.5 mm

Spacer 4 x 6 x 1.5 mm, brass Content of the package: 2 pieces