Marques

No brand

Fournisseurs

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Joint torique, souple 1.5 x 19 mm

74/19
Note 



O-ring 1.5 x 19 mm soft
Content of the package: 8 pieces
Tip: O-rings always slide with a drop of silicone oil onto the shaft.

6,30 €
TTC
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description



O-ring 1.5 x 19 mm soft
Content of the package: 8 pieces
Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Détails du produit
74/19
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Joint torique, souple 1.5 x 19 mm

Joint torique, souple 1.5 x 19 mm



O-ring 1.5 x 19 mm soft
Content of the package: 8 pieces
Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Donnez votre avis
16 other products in the same category:

Reference: 117/20

Thrust bearing set complete

Review(s): 0

The standard version of our mechanics includes ground thrust bearing shafts with a of 8 mm Ø and a length of 110 mm.Thrust bearings absorb the high centrifugal forces exerted by the main rotor blades. The effect of the axial bearings is retained in full when the blade holders rotate.Thrust bearing set, complete as shown.

Price 54.60€
More
On sale upon request

Reference: 703/33

3-blade centre piece 12 mm

Review(s): 0

Component part for a multi-blade rotor head for 12 mm Ø main shaft; see Ord.No. 703/32, 704/32 resp. 705/32.

Price 214.50€
More
On sale upon request

Reference: 76/16

GRP blade holder, 5 mm ∅ hole

Review(s): 0

As demands on helicopters continue to rise, so stronger blade holders are required. In this case a 14 mm blade holder is combined with a 5 mm Ø hole for blade retention, i.e. the matching blade holder screws and self-locking nuts are M5 in size.GRP blade holder with long linkage armfor two-blade rotor heads

Price 30.60€
More
On sale upon request

Reference: 91/50

Paddles

Review(s): 0

Paddles1 pairapprox. 29 g eachfor ∅ 4 mm / 5 mm flybar

Price 27.40€
More
On sale upon request

Reference: 80/10

Control bridge with metal balls

Review(s): 0

The control bridge actuates the flybar. The servos pass the control commands to the swashplate. The collective pitch compensator connected to the swashplate transfers the movement to the control bridge via the angled pushrods. The flybar accepts the control commands and passes them on to the blade holders and the rotor disc.Control bridge, GRP, for 4 mm ∅...

Price 17.00€
More
On sale upon request

Reference: 79/25

Flybar stainless steel 5 x 530 mm

Review(s): 0

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Price 21.80€
More
On sale upon request

Reference: 54/16

Clamp ring pitch compensator 17 mm

Review(s): 0

The 17 mm Ø clamp ring is fitted to the rotor head centre piece, the steel pin slides in the guide slot of the pitch compensator. Rotate the clamp for fine adjustment so that your helicopter flies straight when you apply a pitch-axis command.Clamp ring for pitch compensator 17 mm Ø, length of the pin 30 mm.

Price 27.40€
More
On sale upon request

Suivez-nous sur Facebook