Cooling fan for petrol engine

Reference: 830/3

Cooling fan puller for the G230 petrol engine

If you wish to install an electric on-board starter on a petrol engine, you will need to remove the existing cooling fan and replace it with a different one. The fan can only be removed using a puller.If you don't have the right tool, removing the fan often turns out to be a difficult task.We have designed the fan puller specifically for this purpose, so...

Reference: 1022/3

High-performance spark plug for petrol engine G230 / G240

The ignition spark of a spark plug occurs between two electrodes (multiple agent alloying on nickel base). The spark plug gap varies considerably depending on the application.

Reference: 1022/1

Spark plug for engine ZG23

The ignition spark of a spark plug occurs between two electrodes (multiple agent alloying on nickel base). The spark plug gap varies considerably depending on the application. High-performance spark plug for petrol engine ZG23.

Reference: 830/68

Fine-mesh petrol and kerosine filter

Chemical analysis used in Formel 1 is able to determine 1 g of impurity within 1 ton of oil. To fulfill your demand on the cleanness of the fuel for your model helicopter you use the fine-mesh petrol filter inside the fuel tubing between the tank and the carburettor. Also suitable for kerosine turbine fuel.

Reference: 9/25

Estera reflectante de calor

Reference: 1023/1

Throttle lever for petrol engine G230 / G240

Not available

Reference: 1022/13

Carburettor intake trumpet

This screw-fitting carburettor intake trumpet is designed to improve the flow of air entering the carburettor. Complete with screws and gasket.

Reference: 13/27

Carenado de la válvula de llenado

Reference: 13/25

Válvula de llenado para metanol y bencina

Reference: 4321

Suppressed plug cap for petrol engine G230 / G240

Suppressed plug cap to protect the radio control system from potential interference caused by the ignition system

Reference: 1023/11

Carburator for benzine motor

Not available

Reference: 834/38

Motor support kit for G230

With the aid of this set the mechanics gets a significant support because it avoids mechanical twisting caused by the engine.We leave it to your own discretion to convert existing petrol mechanics.