Marques

No brand

Fournisseurs

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Motor support kit for G230

834/38
Note 

With the aid of this set the mechanics gets a significant support because it avoids mechanical twisting caused by the engine.
We leave it to your own discretion to convert existing petrol mechanics.

54,60 €
TTC
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

With the aid of this set the mechanics gets a significant support because it avoids mechanical twisting caused by the engine.
We leave it to your own discretion to convert existing petrol mechanics.

Détails du produit
834/38
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Motor support kit for G230

Motor support kit for G230

With the aid of this set the mechanics gets a significant support because it avoids mechanical twisting caused by the engine.
We leave it to your own discretion to convert existing petrol mechanics.

Donnez votre avis
12 autres produits dans la même catégorie :

Référence: 830/68

Filtre à essence, mailles fines

Commentaire(s): 0

Chemical analysis used in Formel 1 is able to determine 1 g of impurity within 1 ton of oil. To fulfill your demand on the cleanness of the fuel for your model helicopter you use the fine-mesh petrol filter inside the fuel tubing between the tank and the carburettor. Also suitable for kerosine turbine fuel.

Prix 25,10 €
Détails
En vente sur demande

Référence: 1022/13

Carburettor intake trumpet

Commentaire(s): 0

This screw-fitting carburettor intake trumpet is designed to improve the flow of air entering the carburettor. Complete with screws and gasket.

Prix 34,30 €
Détails
En vente sur demande

Référence: 830/3

Cooling fan puller for the G230 petrol engine

Commentaire(s): 0

If you wish to install an electric on-board starter on a petrol engine, you will need to remove the existing cooling fan and replace it with a different one. The fan can only be removed using a puller.If you don't have the right tool, removing the fan often turns out to be a difficult task.We have designed the fan puller specifically for this purpose, so...

Prix 34,30 €
Détails
En vente sur demande

Référence: 1022/1

Spark plug for engine ZG23

Commentaire(s): 0

The ignition spark of a spark plug occurs between two electrodes (multiple agent alloying on nickel base). The spark plug gap varies considerably depending on the application. High-performance spark plug for petrol engine ZG23.

Prix 22,90 €
Détails
En vente sur demande

Suivez-nous sur Facebook