Accueil
Marques

No brand

Meilleures Ventes
Servo linkage set Aperçu rapide

Référence: 97/4

Servo linkage set

Commentaire(s): 0

When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only). When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod...

Prix 40,10 €
Détails
En vente sur demande
Toutes les meilleures ventes

Douille 3,1 x 10 x 23,5 mm

605/66
Note 

plastic

Pack of 2

6,60 €
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

plastic

Pack of 2

Détails du produit
605/66
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Douille 3,1 x 10 x 23,5 mm

Douille 3,1 x 10 x 23,5 mm

plastic

Pack of 2

Donnez votre avis
16 autres produits dans la même catégorie :
Side frame for BENZIN... Aperçu rapide

Référence: 834/50

Side frame for BENZIN Acrobatic

Commentaire(s): 0

The outstanding features of the BENZIN Acrobatic models are mainly based on these side frames. The engine moved to the front to optimise the CofG.Installation of an on-board electric starter as an option.CCPM - i.e. direct linkage at 4-points / 90 degreeInstallation of the tank below the main rotor shaft, i.e. while the tank runs dry the CofG does not...

Prix 114,50 €
Détails
En vente sur demande
Main gearbox dome Aperçu rapide

Référence: 53/6

Main gearbox dome

Commentaire(s): 0

If you are a fan of scale construction you won't be disappointed in the Alouette II. The model version of the gearbox housing is a reproduction of the full-size machine.The main gearbox dome is fitted in place of the dome plate supplied with the mechanics. The same ballrace is used, i.e. Ord.No. 55/5 - 10 x 21 x 5 mm.The greater size and height of the...

Prix 94,20 €
Détails
En vente sur demande
Dome plate GRP Aperçu rapide

Référence: 53

Dome plate GRP

Commentaire(s): 0

At the top of the mechanics the dome plate supports the rotor shaft with the help of a 10 x 21 x 5 mm or 12 x 21 x 5 mm ballrace. To reduce the load on the ballrace a thrust bearing can also be fitted under the dome plate.

Prix 14,80 €
Détails
En vente sur demande
Tail servo bracket Aperçu rapide

Référence: 1002/32

Tail servo bracket

Commentaire(s): 0

If you prefer to mount the tail rotor servo in the mechanics rather than inside the fuselage, this is the accessory you need.

Prix 47,50 €
Détails
En vente sur demande
Retaining spring Aperçu rapide

Référence: 49/16

Retaining spring

Commentaire(s): 0

If your helicopter accidentally makes ground contact, the claw coupling may disengage, and the cruciform element may be lost. Fitting an annular retaining spring ensures exact alignment of the claw coupling, and prevents the cruciform element slipping out.  Retaining springpack of 2

Prix 3,50 €
Détails
En vente sur demande