

No brand
Référence: 2017 E
Référence: 34/30
Tail rotor bladesSpecification 8.0 mm blade root8.7 g approx.29 mm blade chord5.0 mm profile thicknesssymmetrical130 mm longbalanced1 pair
Référence: 10/90
The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...
Below the dome plate you install the clamp ring with the socket on top if no thrust bearing is mounted.
The socket supports the clamp ring against the inner ring of the ballrace - otherwise the clamp ring would grind on the outer ring, and affect the function of the ballrace.
Clamp ring for rotor shaft, 10 mm diameter
Política de seguridad
Política de envío
Política de devolución
Below the dome plate you install the clamp ring with the socket on top if no thrust bearing is mounted.
The socket supports the clamp ring against the inner ring of the ballrace - otherwise the clamp ring would grind on the outer ring, and affect the function of the ballrace.
Clamp ring for rotor shaft, 10 mm diameter
Aucun avis n'a été publié pour le moment.
Riferimento: 830/44
Transverse link petrol mechanics. Content of the package: 2 pieces.
Riferimento: 36/11
The freewheel hubs are sealed on both sides by brass rings; the rings can also be replaced when necessary (i.e. when the freewheel bearings are replaced).Pack of 2
Riferimento: 44/7
Freewheel hub, 10 mm diameter freewheel
Riferimento: 132/38
These parts are used in a petrol Fenestron mechanical system for mounting the gearbox, where the rotational speed of the tail drive shaft (Ord.No. 134/37) has to be increased. Bracket for speed-up gearboxPack of 2, incl. mounting material
Riferimento: 412/49
Ø7 x 2,5 mmContent of the package: 2 pieces
Riferimento: 53/17
Dome fittings set for JetCat PHT3-3 turbine
Riferimento: 791/200
Tail drive belt kit for Cobra with Turbine
Riferimento: 412/15
For Bell 412, Ord.No. 4125 when using JetCat PHT2 turbine
Riferimento: 722/9
The rotor of a model like the Robinson R22 can no longer be slowed down by hand. We can supply an optional rotor brake for mouting below the main gear.The installation can be carried out on an already built set of mechanics (without removing the main rotor shaft). The construction is designed so an accidental activation barely impacts the rotor speed...
Below the dome plate you install the clamp ring with the socket on top if no thrust bearing is mounted.
The socket supports the clamp ring against the inner ring of the ballrace - otherwise the clamp ring would grind on the outer ring, and affect the function of the ballrace.
Clamp ring for rotor shaft, 10 mm diameter