Side frame petrol mechanics

Reference: 107/43

Balls chrome-plated 2.5 x 4.8 mm

Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 10 pieces.

Reference: 58/10

Roll-axis lever

 Content of the package1 piece

Reference: 500/25

Bush 3.1 x 8 x 6 mm

Pack of 2

Reference: 64/69

Washer for crankshaft screw

 Content of the package1 piece

Reference: 834/54

CFK base plate for Benzin Acrobatic

Not available

Reference: 340/36

Lay shaft hub

Not available

Reference: 49/55

Yoke connector, shaft 5 mm

This slotted connection shaft holds the loop of the 2 mm tail drive wire. Like all other tail drive systems it is necessary to install "play" (approx. 1 mm) for the wire. Yoke connector5 mm diameter shaft

Reference: 53

Dome plate GRP

At the top of the mechanics the dome plate supports the rotor shaft with the help of a 10 x 21 x 5 mm or 12 x 21 x 5 mm ballrace. To reduce the load on the ballrace a thrust bearing can also be fitted under the dome plate.

Reference: 53/15

Dome fittings set for PHT3

Bell cranks/main shaft adaptor for JetCat Turbine, for 2-blade main rotor head

Reference: 834/50

Side frame for BENZIN Acrobatic

The outstanding features of the BENZIN Acrobatic models are mainly based on these side frames. The engine moved to the front to optimise the CofG.Installation of an on-board electric starter as an option.CCPM - i.e. direct linkage at 4-points / 90 degreeInstallation of the tank below the main rotor shaft, i.e. while the tank runs dry the CofG does not...

Reference: 607/53

Set plato ciclico BO 105 T-Rex

Reference: 44/7

Freewheel hub 10 mm driven tail

Freewheel hub, 10 mm diameter freewheel

Reference: 340/31

Hub gear 130 teeth

Not available

Reference: 49/16

Retaining spring

If your helicopter accidentally makes ground contact, the claw coupling may disengage, and the cruciform element may be lost. Fitting an annular retaining spring ensures exact alignment of the claw coupling, and prevents the cruciform element slipping out.  Retaining springpack of 2

Reference: 37/15

Gehäuse mit Deckel für Alu-Hauptgetriebe

Not available

Reference: 53/19

Dome fittings set for PHT3-L

Dome fittings set for JetCat PHT3-L turbine