Transparent-spray blue

Riferimento: 10/5

Mixer nozzles for 10/1 dispenser

 Content of the package5 pieces

Riferimento: 10/76

Sanding primer for wood

In full-fuselage helicopters the mechanical system is generally mounted on previously installed wooden bulkheads. If the bulkheads are to be painted, the wood surface must first be primed. Primer seals the pores in the wood and hardens projecting fibres; they can then be sanded off before the final painted finish is applied. Painting a primed component...

Riferimento: 16/1

Spray nero opaco resistente al calore

Riferimento: 16/13

Transparent-spray black

e.g. for windows

Riferimento: 90/37

Point oiler

The point oiler allows you to reach inaccessible areas of the model, and apply finely metered quantities of oil just where you want them. The point oiler has a flexible lubricant reservoir in the handle. The oil level is easy to see, and the unit can be refilled by unscrewing the stainless steel probe. The unit is totally leak-proof; no oil will ever escape.

Riferimento: 10/68

Adhesive weights

The Centre of Gravity of any helicopter must be exactly right. For you this means checking your completed and fully assembled helicopter against the building instructions: the slightest modification to the model's construction may well cause a change in the model's balance, and you can correct this either with an additional battery (providing the gyro...

Riferimento: 16/12

Transparent-spray green

e.g. for windows

Riferimento: 11/41

Pin, for applying thread lock

A Loctite pin is an essential tool for every workshop. Using the pin it is easy to apply the quantity of fluid you need in small threaded holes. The pin is chrome-plated so that the fluid can easily be wiped off again.