Tête rotor tripales, 12 mm

Référence: 704/32

Tête rotor quadripales, 12mm

Des têtes de rotor avec trois ou plusieurs pales constituent un chapitre à part dans le domaine de l'hélicoptère modèle réduit. Nombreux pilotes ressentent l'envie de piloter un jour une...

Référence: 703/480

tête de rotor pour Chinook

 For use on Ord. No. 4800 only !! Other rotorheads cannot be used on this model.Two rotor heads are required for Ord.No. 4800.

Référence: 268/72

Tête de rotor 3-pales pour axe de rotor 15 mm

3-blade rotor head for 15 mm Ø rotor shaft.

Référence: 722/72

Tête de rotor VR-22

The loading of every component of this rotor system is designed to take a multiple of the actual forces. We are looking here at purely safety reserves and under no cirumstances should they be used for experimental purposes.Because of the special requirements of materials used in the rotor head, we expressly recommend that only genuine VARIO spare parts...

Référence: 1005/52

Tête rotor à 2500 mmOrd.No. 1005/52

Ord.No. 1005/52 is for a Ø 15 mm rotor shaft and Ord.No. 1005/49 for Ø 12 mm rotor shaft

Référence: 705/34

Tête pentapales, 12 mm

Pour axe rotor de 12 mm, fixation de pale à un trou

Référence: 702/80

Tête de rotor semi-maquette SKS

The UH-1D or UH-1B models with an excessive length of the rotor shaft out of the mechanics fly for safety reasons with rotor shafts of 12 mm Ø. The difference between the SKS semi-scale rotor heads on offer is due to the centre hub. This version fits the shaft diameter of 12 mm.We recommend this rotor head for experenced pilots only.The performance of...

Référence: 1005/50

Tête VARIO Sky Fox

The Sky Fox rotor head in its original form is robust and very sturdy, so it can achieve good results in all flight positions.The rotor head is supplied with a ball raced pitch compensator and two main shaft collars, their use depends on the length of the rotor shaft.CautionIt is not permissible to use this rotor head on a mechanical system powered by a...

Référence: 703/35

Tête rotor tripales, 10 mm

Not available

Référence: 1005/12

Tête rotor pour Bell 212Ord.No. 1005/12

The basic method of operation of the turbine-powered Bell 212's rotor head is the same as that of the Bell 47 G III rotor head. The main difference is that the components have been modified to match the appearance of the Bell 212, and are therefore of different design. For example, a separate swashplate driver is not required, as it is integrated into the...

Référence: 706/20

6-Blatt Rotorkopf für Ø 12 mm Welle

Référence: 1005/49

Tête rotor pour Bell 230 ou AIRWOLFOrd.No. 1005/49

This rotor head is specially designed for the use with an AIRWOLF or a Bell 230.Rotor shaft 12 mm, rotor disc 2360 mmOrd.No. 1005/52 is for a Ø 15 mm rotor shaft and Ord.No. 1005/49 for a Ø 12 mm rotor shaft

Référence: 705/36

5-pale tête rotor 12 mm

Not available

Référence: 702/60

Tête CSS bipales 10 mm / ø5 mm

CSS stands for Cyclic Speed System at this rotor head because the cyclic control occurs more spontaneous.As, for example, a Jet Ranger or an AIRWOLF requires a true-scale look in the air, a rotor head without a flybar is part of the scale detail for these helicopters. Because of its exact reactions in flight we recommend this CSS rotor head.Only the...

Référence: 702/70

Tête de rotor semi-maquette

This semi-scale rotor head includes additional mixing of the blade holder actuator linkage at a ratio of 2 : 1. This results in well-balanced flying characteristics, and the model has a damped rather than direct response to your control inputs (resembling a 2-blade head with flybar).Use only the suggested rotor blades for flybar-less rotor heads,...

Référence: 703/40

Tête de rotor 3-pales pour axe de rotor Ø 12 mm

Les grands modèles nécessitent des têtes de rotor conséquents, adaptées aux exigences du diamètre de rotor correspondant, et pouvant être montées sur des axes de Ø 12 mm. Comme pales,...