Marques

No brand

Référence: 97/4

Servo linkage set

Commentaire(s): 0

When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only). When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod...

Prix 40,10 €
Détails
En vente sur demande
Toutes les meilleures ventes

Kit palier central

260/17
Note 

 

  • Centre bearing set
  • including 2 O-rings
  • excluding ballrace
21,80 €
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

 

  • Centre bearing set
  • including 2 O-rings
  • excluding ballrace
Détails du produit
260/17
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Servo linkage set

Servo linkage set



When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only).
When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod connectors.
Servo linkage set, 18-part

Donnez votre avis
16 autres produits dans la même catégorie :

Référence: 800/37

Support de verrière 26 mm

Commentaire(s): 0

The required length of the canopy holder is determined by the kind of canopy and the location of its fitting points on the side frames.

Prix 9,70 €
Détails
En vente sur demande

Référence: 800/6

Kit empennage jaune

Commentaire(s): 0

Instead of a horizontal fin (for mounting on the tail boom) the small inset horizontal panel replaces that. The inset fits on top of the stabiliser, outwards opposite of the tail rotor.220 mm high, excl. tail skid3-part, 45 g total weight

Prix 23,80 €
Détails
En vente sur demande

Référence: 800/50

Empennage 3-D en fibre de carbone

Commentaire(s): 0

When you are attempting high-speed flying in reverse and also certain pirouettes you may find that the helicopter's heading changes due to the influence of the solid vertical stabiliser. That is the basic reason for the development of this special 3-D tail.It is very strong, and its large size removes the need for a tail skid. The stabiliser is...

Prix 54,60 €
Détails
En vente sur demande

Référence: 800/22

Béquille noire

Commentaire(s): 0

Tail skids only. Create your own individual colour scheme: e.g. white stabiliser - red skid!

Prix 5,50 €
Détails
En vente sur demande