Support de poutre

Reference: 809/12

M 4 Verschraubung

Reference: 260/38

Strut for motor

Strut for motor, XLV.

Reference: 890/49

Lagerplatte

Reference: 802/24

Kühlluftschacht Boxer

Reference: 800/4

Stabiliser set white

Instead of a horizontal fin (for mounting on the tail boom) the small inset horizontal panel replaces that. The inset fits on top of the stabiliser, outwards opposite of the tail rotor.220 mm high, excl. tail skid3-part, 45 g total weight

Reference: 870/105

Toothed belt, pitch T5/340

Toothed belt, pitch 5for X-Treme trainer helicoptersWhen replacing a toothed belt please note that different toothed belts are used in X-Treme mechanics and X-Treme trainer helicopters.

Reference: 860/30

CFK-Rohr 8 x 6 x 700 mm

Reference: 800/21

Tail skid yellow

Tail skids only. Create your own individual colour scheme: e.g. white stabiliser - red skid!

Reference: 260/17

Centre bearing set

 Centre bearing setincluding 2 O-ringsexcluding ballrace

Reference: 802/17

Strut holder - 25 mm

  Content of the package 1 piece

Reference: 310/8

Tuned pipe holder 2-part

GRP tuned pipe holders are used to secure the tuned pipe to the tail booms. They are easy to clamp in place. The tail pipe of the tuned pipe should be covered with silicone hose (Order No. 116/8), or with one of the tail pipes (Ord.No. 116/0 or 116/9), so that the heat of the pipe does not damage the holder.Tuned pipe holder, 2-partfor 20 mm ��tail boom

Reference: 870/31

Strebenanschluß-Hülse

Reference: 260/11

Stabiliser set, XLV

GRP Stabiliser set for XLV Trainer.

Reference: 107/26

Chassis brace set for X-Treme

Chassis brace set for X-Treme31-part

Reference: 860/53

Domplatte, Alu

Reference: 800/37

Canopy holder 26 mm

The required length of the canopy holder is determined by the kind of canopy and the location of its fitting points on the side frames.