Toothed belt for X-Perience, 3M/606

Reference: 800/20

Tail skid red

Tail skids only. Create your own individual colour scheme: e.g. white stabiliser - red skid!

Reference: 7/10

Buttonholes for the assembly hall 3 x

 Content of the package2 pieces

Reference: 870/7

Heckrohrhalter, Alu

Reference: 30/7

Strut set fibra de carbono 8 x 200 mm

Reference: 860/30

CFK-Rohr 8 x 6 x 700 mm

Reference: 860/11

Heckrohrhalter, 2fach kugelgelagert

Reference: 260/10

Tail boom support

Tail boom support XLV.

Reference: 800/37

Canopy holder 26 mm

The required length of the canopy holder is determined by the kind of canopy and the location of its fitting points on the side frames.

Reference: 870/24

Kühlluftschacht X-Treme, 4teilig

Reference: 800/50

3-D stabiliser, carbon fibre

When you are attempting high-speed flying in reverse and also certain pirouettes you may find that the helicopter's heading changes due to the influence of the solid vertical stabiliser. That is the basic reason for the development of this special 3-D tail.It is very strong, and its large size removes the need for a tail skid. The stabiliser is...

Reference: 860/31

Strebenanschluß-Hülse

Reference: 800/25

Stabiliser set large

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.275 mm high118 g total weightscrew fitting to tail rotor holder

Reference: 800/21

Tail skid yellow

Tail skids only. Create your own individual colour scheme: e.g. white stabiliser - red skid!

Reference: 722/37

Angle bracket

Angle bracket

Reference: 260/2

Tail fin and strut holder

Tail fin and strut holder XLV.

Reference: 809/7

Heckrohrhalter 20 mm