Kühlluftschacht Boxer

Référence: 802/50

Verbreiterungs-Set

Référence: 870/24

Kühlluftschacht X-Treme, 4teilig

Référence: 830/6

RC-Vorbau

Référence: 809/6

RC-Vorbau Sky Fox

Référence: 800/22

Béquille noire

Tail skids only. Create your own individual colour scheme: e.g. white stabiliser - red skid!

Référence: 24/7

Conducto de aire de enfriamiento para foxy

Référence: 30/7

Strut set fibra de carbono 8 x 200 mm

Référence: 870/30

Streben-Set, CFK

Référence: 126/2

Skid reinforcement, carbon fibre

Not available

Référence: 800/25

Kit empennage, grand

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.275 mm high118 g total weightscrew fitting to tail rotor holder

Référence: 834/41

Toothed belt, XL/190

Toothed belt for BENZIN Acrobatic.

Référence: 260/15

Etrier de patin

Skid strut 8 x 450 mm silver

Référence: 870/105

Toothed belt, pitch T5/340

Toothed belt, pitch 5for X-Treme trainer helicoptersWhen replacing a toothed belt please note that different toothed belts are used in X-Treme mechanics and X-Treme trainer helicopters.

Référence: 310/8

Support de résonateur 70 mm

GRP tuned pipe holders are used to secure the tuned pipe to the tail booms. They are easy to clamp in place. The tail pipe of the tuned pipe should be covered with silicone hose (Order No. 116/8), or with one of the tail pipes (Ord.No. 116/0 or 116/9), so that the heat of the pipe does not damage the holder.Tuned pipe holder, 2-partfor 20 mm ��tail boom

Référence: 260/11

Kit empennage XLV Trainer

GRP Stabiliser set for XLV Trainer.

Référence: 800/50

Empennage 3-D en fibre de carbone

When you are attempting high-speed flying in reverse and also certain pirouettes you may find that the helicopter's heading changes due to the influence of the solid vertical stabiliser. That is the basic reason for the development of this special 3-D tail.It is very strong, and its large size removes the need for a tail skid. The stabiliser is...