Adapter für Vorbau Benzin-Trainer

Référence: 802/50

Verbreiterungs-Set

Référence: 800/21

Béquille jaune

Tail skids only. Create your own individual colour scheme: e.g. white stabiliser - red skid!

Référence: 260/38

Tirant pour moteur

Strut for motor, XLV.

Référence: 870/4

Querverbinder, GFK

Référence: 260/10

Renfort pour XLV Trainer

Tail boom support XLV.

Référence: 870/8

Winkel für Kreisel

Référence: 722/39

Tirant pour moteur

Support for motor

Référence: 24/7

Conducto de aire de enfriamiento para foxy

Référence: 870/105

Toothed belt, pitch T5/340

Toothed belt, pitch 5for X-Treme trainer helicoptersWhen replacing a toothed belt please note that different toothed belts are used in X-Treme mechanics and X-Treme trainer helicopters.

Référence: 800/50

Empennage 3-D en fibre de carbone

When you are attempting high-speed flying in reverse and also certain pirouettes you may find that the helicopter's heading changes due to the influence of the solid vertical stabiliser. That is the basic reason for the development of this special 3-D tail.It is very strong, and its large size removes the need for a tail skid. The stabiliser is...

Référence: 260/15

Etrier de patin

Skid strut 8 x 450 mm silver

Référence: 809/7

Heckrohrhalter 20 mm

Référence: 800/25

Kit empennage, grand

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.275 mm high118 g total weightscrew fitting to tail rotor holder

Référence: 107/28

Raccord articulé droit

 Ball-linkstraightpack of 6

Référence: 809/12

M 4 Verschraubung

Référence: 800/20

Béquille rouge

Tail skids only. Create your own individual colour scheme: e.g. white stabiliser - red skid!