Marques

No brand

Référence: 97/4

Servo linkage set

Commentaire(s): 0

When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only). When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod...

Prix 40,10 €
Détails
En vente sur demande
Toutes les meilleures ventes

Tube PTFE 20 x 2,5 x 120 mm

115/5
Note 

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise".
The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This extremely heat-resistant material, with 2.5 mm wall thickness and 20 mm I.D. will last a full season if handled carefully.

  • PTFE pipe
  • approx. 20 mm I.D.
  • approx. 25 mm A.D.
  • 120 mm long
16,90 €
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise".
The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This extremely heat-resistant material, with 2.5 mm wall thickness and 20 mm I.D. will last a full season if handled carefully.

  • PTFE pipe
  • approx. 20 mm I.D.
  • approx. 25 mm A.D.
  • 120 mm long
Détails du produit
115/5
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Tube PTFE 20 x 2,5 x 120 mm

Tube PTFE 20 x 2,5 x 120 mm

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise".
The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This extremely heat-resistant material, with 2.5 mm wall thickness and 20 mm I.D. will last a full season if handled carefully.

  • PTFE pipe
  • approx. 20 mm I.D.
  • approx. 25 mm A.D.
  • 120 mm long
Donnez votre avis
16 altri prodotti della stessa categoria:

Riferimento: 64/50

Estensione per il bagagliaio, albero da 150 mm

Recensioni: 0

The starter system with 10 mm freewheel and hexagon shaft has proved excellent in practice. If you own this system and wish to use it to start engines with a propeller fitted, or use it on a fan with its outer cone, you can convert the starter system very easily.

Prezzo 118,40 €
Più
In vendita su richiesta

Riferimento: 28/11

Cavo al silicio per candela di piombo

Recensioni: 0

Silicon cable for glow plug connector; it's highly flexible, exellent suited for use as glow plug connetor cable. Content: approx. 1 m

Prezzo 6,60 €
Più
In vendita su richiesta

Riferimento: 28/9

Set di clip di coccodrillo

Recensioni: 0

For example, the glow plug connector permanently installed in the model may consist of a crocodile clip (or the plug clip 4308), a solder tag for the earthing to the heat-sink head, a panel mounting socket and a cable.Crocodile clip set, also known as Aligator clip

Prezzo 6,60 €
Più
In vendita su richiesta

Riferimento: 67/42

Adattatore di avviamento per cranksha M 8

Recensioni: 0

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 8 mm crankshaft threade.g. at Rossi engines

Prezzo 75,80 €
Più
In vendita su richiesta