Accueil
Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Tube PTFE 20 x 2,5 x 100 mm

115/11
Note 



Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise".
The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This extremely heat-resistant material, with 2.5 mm wall thickness and 20 mm I.D. will last a full season if handled carefully.

  • PTFE pipe
  • approx. 20 mm I.D.
  • approx. 25 mm A.D.
  • 100 mm long
19,40 €
TTC
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description



Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise".
The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This extremely heat-resistant material, with 2.5 mm wall thickness and 20 mm I.D. will last a full season if handled carefully.

  • PTFE pipe
  • approx. 20 mm I.D.
  • approx. 25 mm A.D.
  • 100 mm long
Détails du produit
115/11
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Tube PTFE 20 x 2,5 x 100 mm

Tube PTFE 20 x 2,5 x 100 mm



Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise".
The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This extremely heat-resistant material, with 2.5 mm wall thickness and 20 mm I.D. will last a full season if handled carefully.

  • PTFE pipe
  • approx. 20 mm I.D.
  • approx. 25 mm A.D.
  • 100 mm long
Donnez votre avis
16 other products in the same category:
Engine running-in aid Quick view

Reference: 399

Engine running-in aid

Review(s): 0

Complete beginners preparing themselves and their new helicopter for their first attempts at flying are often faced with many and varied problems.For example: how can you run-in a new engine...

Price 65.70€
More
On sale upon request
Heat-resistant matt black... Quick view

Reference: 16/1

Heat-resistant matt black spray paint

Review(s): 0

This heat-resistant matt black spray paint is suitable for use on silencers, exhaust manifolds and turbine exhaust pipes. The paint is temperature-resistant to 600° C; even more importantly: it...

Price 32.60€
More
On sale upon request
Heat reflective mat Quick view

Reference: 25/9

Heat reflective mat

Review(s): 0

Between fuselage and exhaust tube a heat-reflecting mat avoids melting of the fibreglass. Even in smaller fuselages where conventional silencer systems are close to the inside surface, the heat reflective mat is useful as a heat shield.Heat reflective matheat rejectingsize approx. 300 x 700 mmmat thickness approx. 3 mm

Price 37.30€
More
On sale upon request

Suivez-nous sur Facebook

Facebook