Startadapter, GFK

Reference: 115/15

Flex hose 12 x 170 mm

 Content of the package1 piece

Reference: 871/45

Bush set X-Treme mechanics

 Content of the package1 x 4,0 mm4 x 16,8 mm4 x 30,2 mm4 x 31,2 mm

Reference: 870/48

Alu-Lagerplatte

Reference: 67/41

Starter adaptor for 5/16" crankshaft

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 5/16" -24 UNF crankshaft threade.g. at Webra P5 and 4-stroke engines

Reference: 64/50

Starter extension, 150 mm shaft

The starter system with 10 mm freewheel and hexagon shaft has proved excellent in practice. If you own this system and wish to use it to start engines with a propeller fitted, or use it on a fan with its outer cone, you can convert the starter system very easily.

Reference: 870/54

Belt tension roller bearer, X-Treme

Belt tension roller bearer. Content of the package: 1 piece.

Reference: 64/4

Propeller driver

 Content of the package1 piece

Reference: 399

Engine running-in aid

Complete beginners preparing themselves and their new helicopter for their first attempts at flying are often faced with many and varied problems.For example: how can you run-in a new engine...

Reference: 802/48

Motor-Spezialmutter

Reference: 115/11

PTFE pipe 20 x 2.5 x 100 mm

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise". The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This...

Reference: 16/2

Silencer paint, black

Silencers and tuned pipes become discoloured and un-sightly during the course of their hard life, but they can be revived with this special heat-resistant paint.The silencer paint also is designed to improve heat dissipation. Heat resistant up to 500° C.150 ml spray can

Reference: 67/43

Starter adaptor for 1/4" crankshaft

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 1/4" -28 UNF crankshaft threade.g. at O.S. engines

Reference: 1020/20

Crankshaft nut 1/4" 28 UNF

 Content of the package1 piece

Reference: 116/17

Flex hose screw fittings set

  Content of the package complete as shown

Reference: 64/39

Silicone cable

Silicone cableapprox. 1.5 msuitable for any starter and can also be used as a battery charger lead for electric flight.

Reference: 28/9

Crocodile clip set

For example, the glow plug connector permanently installed in the model may consist of a crocodile clip (or the plug clip 4308), a solder tag for the earthing to the heat-sink head, a panel mounting socket and a cable.Crocodile clip set, also known as Aligator clip