

No brand
Référence: 2017 E
Référence: 34/30
Tail rotor bladesSpecification 8.0 mm blade root8.7 g approx.29 mm blade chord5.0 mm profile thicknesssymmetrical130 mm longbalanced1 pair
Référence: 10/90
The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...
The diameter of the Fenestron fan has a slightly larger diameter than the 1 : 5.7 scale of 175 mm.
Attached to the centre hub are eight ballraced Fenestron rotor blades. These blades are 68 mm long and have a blade chord of 21 mm.
Fenestron, kit-form, complete as shown.
Política de seguridad
Política de envío
Política de devolución
The diameter of the Fenestron fan has a slightly larger diameter than the 1 : 5.7 scale of 175 mm.
Attached to the centre hub are eight ballraced Fenestron rotor blades. These blades are 68 mm long and have a blade chord of 21 mm.
Fenestron, kit-form, complete as shown.
Aucun avis n'a été publié pour le moment.
Reference: 34/10
Blade set for Fenestron Ord.No. 92/90, 92/95set of 8 bladesleft hand rotationtotal length: approx. 65 mmblade length (middle of blade holder hole to blade tip): approx. 60 mmmaterial: CFRPFenestrons are used on full-size helicopters because they reduce flying noise and increase safety margins for ground crew and passengers during and after...
Reference: 34/23
Blade set for Fenestron Ord.No. 93/90set of 10 bladesleft hand rotationtotal length: approx. 66 mmblade length (middle of blade holder hole to blade tip): approx. 57 mmwidth: approx. 14.5 mmblade root: 2 + 0.1 mm / ø 2 mmmaterial: CFRP
Reference: 98/20
Control sleevefor tail rotor shaft 6 mm Øwith nut (left-hand thread!)to be used on a Fenestron tail rotor
Reference: 34/91
For the 10-blade Fenestron, as used in the EC 135, this cap is made of carbon fiber. For the ECs with Rotorkreis 1,60m / 1,68 m, Ord.No. 1320 – 1330 – 1340. Fenestron Ord.No. 93/90.
Reference: 34/11
Blade set for Fenestron Ord.No. 92/90, 92/95set of 8 bladesleft hand rotationtotal length: approx. 65 mmblade length (middle of blade holder hole to blade tip): approx. 60 mmmaterial: injection molded plasticThe shape of the "blades" for a Fenestron (e.g. see model EC 135 or Dauphin) differs from those of a conventional tail rotor.With a total length of...
Reference: 93/100
10 blade Fenestron for use in the Vario EC 135 - Ord.No. 1320, 1330, 1340. Including high-quality carbon fiber blades. Very good efficiency. As an upgrade of the existing mechanism in the standard Fenestron.
Reference: 92/76
90° angle gearbox for Fenestronwith aluminium housingkit-formcomplete as shown
Reference: 93/45
10 blade Fenestron for use in the Vario H145 T2 - Ord.No. 1470. Including high-quality carbon fiber blades. Very good efficiency.
Reference: 93/90
10 blade Fenestron for use in the Vario EC 135 - Ord.No. 1320, 1330, 1340. Including high-quality carbon fiber blades. Very good efficiency. As an upgrade of the existing mechanism in the standard Fenestron.
The diameter of the Fenestron fan has a slightly larger diameter than the 1 : 5.7 scale of 175 mm.
Attached to the centre hub are eight ballraced Fenestron rotor blades. These blades are 68 mm long and have a blade chord of 21 mm.
Fenestron, kit-form, complete as shown.