

No brand
Référence: 2017 E
Blade set for Fenestron Ord.No. 92/90, 92/95
set of 8 blades
left hand rotation
total length: approx. 65 mm
blade length (middle of blade holder hole to blade tip): approx. 60 mm
material: injection molded plastic
The shape of the "blades" for a Fenestron (e.g. see model EC 135 or Dauphin) differs from those of a conventional tail rotor.
With a total length of 65 mm the pre-finished blade runs a trapeziform from 25.5 mm chord (inside) to 19.5 mm (outside). The unique arched shape of the Fenestron blade helps to handle the extra forces involved.
Política de seguridad
Política de envío
Política de devolución
Blade set for Fenestron Ord.No. 92/90, 92/95
set of 8 blades
left hand rotation
total length: approx. 65 mm
blade length (middle of blade holder hole to blade tip): approx. 60 mm
material: injection molded plastic
The shape of the "blades" for a Fenestron (e.g. see model EC 135 or Dauphin) differs from those of a conventional tail rotor.
With a total length of 65 mm the pre-finished blade runs a trapeziform from 25.5 mm chord (inside) to 19.5 mm (outside). The unique arched shape of the Fenestron blade helps to handle the extra forces involved.
Aucun avis n'a été publié pour le moment.
Reference: 34/10
Blade set for Fenestron Ord.No. 92/90, 92/95set of 8 bladesleft hand rotationtotal length: approx. 65 mmblade length (middle of blade holder hole to blade tip): approx. 60 mmmaterial: CFRPFenestrons are used on full-size helicopters because they reduce flying noise and increase safety margins for ground crew and passengers during and after...
Reference: 34/45
Blade set for Fenestron Ord.No. 93/90, 93/45set of 8 bladesleft hand rotationtotal length: approx. 69 mmblade length (middle of blade holder hole to blade tip): approx. 61 mmwidth: approx. 14.5 mmblade root: 2 + 0.1 mm / ø 2 mmmaterial: CFRP
Reference: 92/76
90° angle gearbox for Fenestronwith aluminium housingkit-formcomplete as shown
Reference: 92/90
The diameter of the Fenestron fan has a slightly larger diameter than the 1 : 5.7 scale of 175 mm.Attached to the centre hub are eight ballraced Fenestron rotor blades. These blades are 68 mm long and have a blade chord of 21 mm.Fenestron, kit-form, complete as shown.
Reference: 34/23
Blade set for Fenestron Ord.No. 93/90set of 10 bladesleft hand rotationtotal length: approx. 66 mmblade length (middle of blade holder hole to blade tip): approx. 57 mmwidth: approx. 14.5 mmblade root: 2 + 0.1 mm / ø 2 mmmaterial: CFRP
Reference: 92/95
Fenestron complete with aluminium tail gearbox and blades, only for operation with petrol mechanics or JetCat mechanics, but only to be used together with Ord.No. 134/37
Reference: 94/8
Bush for aluminium tail rotor, Fenestron, brass.
Reference: 93/45
10 blade Fenestron for use in the Vario H145 T2 - Ord.No. 1470. Including high-quality carbon fiber blades. Very good efficiency.
Reference: 93/90
10 blade Fenestron for use in the Vario EC 135 - Ord.No. 1320, 1330, 1340. Including high-quality carbon fiber blades. Very good efficiency. As an upgrade of the existing mechanism in the standard Fenestron.
Reference: 92/31
Aluminium cover for tail rotor housing for aluminium tail rotor with 5 mm shaft.
Blade set for Fenestron Ord.No. 92/90, 92/95
set of 8 blades
left hand rotation
total length: approx. 65 mm
blade length (middle of blade holder hole to blade tip): approx. 60 mm
material: injection molded plastic
The shape of the "blades" for a Fenestron (e.g. see model EC 135 or Dauphin) differs from those of a conventional tail rotor.
With a total length of 65 mm the pre-finished blade runs a trapeziform from 25.5 mm chord (inside) to 19.5 mm (outside). The unique arched shape of the Fenestron blade helps to handle the extra forces involved.