JetRanger XL 1:4 - Fuselage kit

Référence: 162/35

Rotor shaft XLV SPT5-H

Not available

Référence: 13/32

Systéme de remplissage pour kérosène

The kerosene refuelling system is sealed with a rubber nipple. The constant low pressure inside the tank draws the nipple firmly against the refuelling opening. That is also the reason why a mechanism such as a spring-controlled valve is not suitable, because the low pressure tends to push the spring back as spring tension diminishes.

Référence: 26/25

Filtre pour prise d'air du réservoir

Tank vent filter, to prevent dirt and other foreign objects from entering fuel supply.

Référence: 26/34

Collier essence - kérosène

Fuel tubing is required to withstand many kinds of thermal and chemical stress, i.e. it has to be resistant to petrol and kerosene whilst maintaining maximum flexibility. However, it must also be possible to fix the tubing reliably to tubes and nipples; the more valuable the model, the more important it becomes to fix the fuel tubing with absolute...

Référence: 26/6

Réservoir pour Kérosène 2,5 l pour JetRanger PHT-3

Tank for kerosene, 2500 mlalternative fueltank, larger capacity

Référence: 1005/52

Tête rotor à 2500 mmOrd.No. 1005/52

Ord.No. 1005/52 is for a Ø 15 mm rotor shaft and Ord.No. 1005/49 for Ø 12 mm rotor shaft

Référence: 105/1

Jet Ranger XL

Not available

Référence: 1002/1200

Electric mechanics XL

Brand new dome mechanics which is especially designed for the scale model electric flight and allows full cockpit detail. This mechanics is suitable for fuselage kit Ord.No. 1112. Electric motors are quiet, low in vibration, without exhaust gases and residual thrust. The blade slap noise of the rotor blades is more noticeable than with other types of...

Référence: 1002/62

Turbine-Mechanics for Bell Jet Ranger (JetCat SPT5-H)

For Big JetRanger

Référence: SPT5H

Turbine Turboshaft Engine JetCat SPT5-H

Référence: KEROSTART

Kerosene start for JetCat

Kero Start SystemWorks with a standard 2S LiPo battery.Minimal power requirement of only 50 watts!Backward compatible with all JetCat engines.No change in the wiring necessary.Screw out the glow plug & screw in the kerosene starter system, insert the previous gas valve into the kerosene circle, and you're done!All ECU`s from version 4.00 can be...

Référence: 416

2-blade-set 2500 mm

Specification 2-blade-set ength:1120 mm rotor disc: 2500 mm blade root: 22 mm 1-hole blade chord: 75 mm profile thickness: 11 mm weight: ca. 500 g material: CFRP Shark Skin finish: anthracite matt symmetry: reflex l.h.r.

Référence: 416/50

2-blade-set 2500 mm

Specification 2-blade-set length:1120 mm rotor disc: 2500 mm blade root: 22 mm 1-hole blade chord: 76 mm profile thickness: 6.5 mm weight: ca. 570 g material: CFRP Shark Skin finish: anthracite matt symmetry: reflex l.h.r.

Référence: 416/5

2-blade-set 2500 mm Alu

Specification 2-blade-set length: 1120 mm rotor disc: 2500 mm blade root: 22 mm 1-hole blade chord: 76 mm profile thickness: 6.5 mm weight: ca. 570 g material: aluminium symmetry: reflex l.h.r.

Référence: 33/2

Rotor blade pouch 2-blade Ø 2100 mm

bag length: 98 cmmax. blade width: 9.5 cm

Référence: 268/55

Swashplate driver for 15 mm rotor shaft

Swashplate driver for 15 mm Ø rotor shaft.

Référence: 1003/88

Tail rotor for JetRanger XL

Référence: 34/36

Tail rotor blades 180 mm, grey

Tail rotor blade, rotor disc 440 mm ØSpecification 8.0 mm blade root21 g approx.42 mm blade chordGRP5.0 mm profile thicknesssymmetrical180 mm longbalanced1 pair

Référence: 512/101

XL mechanics tail drive system

Not available

Référence: 134/402

Cyclic stick x2 1:4

dimensions: 3.76 x 2.86 x 15 cmPack of 2 (each 2-part)

Référence: 134/439

Collective Pitch lever x2 1:4

dimensions: 13.3 x 2.7 x 2.06 cmPack of 2

Référence: 134/408

Pedals EC x2 1:4

dimensions: 8.5 x 3.8 x 6 cmPack of 2

Référence: 112/401

Ventilation grilles front

dimensions: 4.5 x 4.5 x 0.1 cmPack of 2 (l/r)

Référence: 995

RC system accessories incl. 5 servos

If you already own a radio control system and then purchase a second model helicopter, the next step is to consider carefully which electronic components are the best choice for the new model.The combination illustrated here comprises accessories which have proved excellent in practice. RC system accessories, with Futaba BLS 452 servos excluding radio...

Référence: 14/76

Car sticker Jet Ranger silver

Car stickers show everyone immediately that you are a member of the helicopter scene. These stickers are factory-trimmed, and make it possible to transfer only the finely cut lines onto the base surface you have choosen. The stickers adhere very well, and do not fade.Color: silverSize approx. 80 x 200 mm

Référence: 5/105

Coffee mug JETRANGER big

Not available

Référence: 5/104

Coffee mug JETRANGER small

Not available

Référence: 112/29

Cockpit JetRanger XL Elektro

Référence: 112/35

Hauptrotorwelle JetRanger XL Elektro

Référence: 70/176-2

Gestänge 3,0 x 176 mmOrd.No. 70/176-2

Référence: 70/116-2

Gestänge 3 x 115 mmOrd.No. 70/116-2

Référence: 105/31

Jet Ranger XL Scheibensatz klar