Marques

No brand

Fournisseurs

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Bo 105 1:6 - Fuselage kit

6002.e
Note 

The "small Bo 105" from VARIO is a 700 size scale helicopter. You can power this remote-controlled model helicopter with gasoline (benzin) or electric propulsion. With its wide landing gear and...

Motorisation
741,30 €
TTC
Quantité
En stock

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

The "small Bo 105" from VARIO is a 700 size scale helicopter. You can power this remote-controlled model helicopter with gasoline (benzin) or electric propulsion. With its wide landing gear and the high-level tail rotor the helicopter is well suited for the less experienced pilots. Messerschmitt-Bölkow-Blohm (MBB), later bought by Airbus Helicopters, is the creator of the man-carrying version. For VARIO's 700 Bo 105 we recommend a maximum main rotor speed of 1500 rpm. Electric drive sets from VARIO are already tuned to this head speed.Select one of the following drive types:Benzin MechanicsThe benefit of a gasoline helicopter is a robust, easy-to-use engine for long flight times. The fuel is available at every petrol station (2-stroke mix). Kit Ord.No. 6002 contains the bulkheads for the gasoline mechanics. If the engine noise in flight does not disturb you, you will enjoy this classic drive system for model making.Electric Mechanics 1002/80Our propulsion recommendation for this helicopter! Contemporary mechanics, especially designed for the scale model electric flight. The mounting points in the fuselage are identical to those of the petrol engine. Therefore, the mechanics can be used in almost all kits that also fit the petrol mechanics of VARIO (in this case Ord.No. 6002). Electric motors are quiet, low-vibration, without exhaust gases and residual thrust. The blade slap noise of the rotor blades is more noticeable than with other types of propulsion and the result is a true-to-life impression in flight. For this electromechanical system we offer a drive set for 12S LiPos.Electric conversion of the Benzin mechanicsUse kit Ord.No. 6002 for conversions of the petrol mechanics to electric motor drive. The strong and rigid aluminum side frames from the petrol mechanics are very suitable for the powerful electric motors being used in model helicopters today. Electric motors provide very quiet operation with low vibration, and no exhaust gases or oily mess to clean up. Model flights are much more realistic without the noise of the petrol engine, and the electric drive is so quiet that even the sound of the rotor blades can be heard in flight. Electric conversions are easy to accomplish using the suitable VARIO drive sets to achieve the optimum system speed for the 87:21 ratio. You may choose between 10S or 12S LiPo battery cells when selecting the conversion drive set that will be right for you.Skyfox-Electric MechanicsThe Skyfox mechanics is a classic VARIO original product. Where glow plug nitro engines used to be, today a small, powerful electric motor drives your rotorcraft. Skyfox, that stands for lightness as it is desired in electric flight resulting in longer flight times. The kit with Ord.No. 6001 contains the frames for the Skyfox mechanics. For this electromechanical system we offer a drive set for 10S LiPos.X-Treme-Electric MechanicsLight and torsion-resistant electro-mechanics derived from the proven variant for nitro based fuels. The purple anodised aluminium elements are characteristic of this model. Kit Ord.No. 6001 is intended for the installation of these mechanics. Drive sets for 10S and 12S LiPos are available.Benzin propulsion option - Build suggestionFirst build a VARIO petrol trainer (Ord.No. 8311) in the pod and boom configuration and fly, later install the mechanics in your scale fuselage. Advantage: You buy the mechanics components at a reasonable price and can learn the flying characteristics of the Benzin Trainer. The trainer mechanics can be built into all kits for gasoline mechanics or the electric mechanics Ord.No. 1002/80 and 1002/82. If you exchange the Benzin Trainer's 2-blade head to a multi-blade scale head, the reduction ratio must be adjusted. It is an easy conversion and the VARIO support network is always available to assist with the change.T-Rex versionKit Ord.No. 6007 is adapted to the T-Rex 700 mechanics (until vintage 2011 / version DFC / DFC-Dominator). For later versions from November 2016 onwards, the supplementary set Ord.No. 307/100 is required. If you are planning to buy a new mechanical system, please choose the variant 700L V2, but we recommend a VARIO mechanism due to the speed. You have the option of converting the T-Rex rotor head to a true-to-life 4-blade rotor head. If you prefer the left hand blade rotation as full size, the freewheel of the T-Rex mechanics can be reversed by 180°. The l.h.r. rotor blades have the Ord.No. 404/31.Modifications for T-Rex up to 2011The Bo 105 was established throughout the world just a few years after her first flight in 1967. As the first twin turbine helicopter, equipped with the technical achievement of the hingeless rotor head, the Bo 105 gained great praise and recognition.

Détails du produit
6002.e

Fiche technique

Échelle
1:6
Longueur
1600 mm
Le poids
ca. 8,5 kg
Largeur
510 mm
Hauteur
260 mm
Diamètre du rotor
1600 mm
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Bo 105 1:6 - Fuselage kit

Bo 105 1:6 - Fuselage kit

The "small Bo 105" from VARIO is a 700 size scale helicopter. You can power this remote-controlled model helicopter with gasoline (benzin) or electric propulsion. With its wide landing gear and...

Donnez votre avis
Vous aimerez aussi

Référence: 60/31

Autocollant Bo 105 MBB

Commentaire(s): 0

Les autocollants avec insignes spécifiques, immatriculation et consignes, sont imprimés sur un film transparent. Découpez les différents motifs avec un cutter et une règle métallique (réf....

Prix 14,70 €
Détails
En vente sur demande

Référence: 70/9

Autocollant POLIZEI

Commentaire(s): 0

Les autocollants avec insignes spécifiques, immatriculation et consignes, sont imprimés sur un film transparent. Découpez les différents motifs avec un cutter et une règle métallique (réf....

Prix 22,90 €
Détails
En vente sur demande

Référence: 704/30

Tête 4-pales 10 mm

Commentaire(s): 0

Des têtes de rotor avec trois ou plusieurs pales constituent un chapitre à part dans le domaine de l'hélicoptère modèle réduit. Nombreux pilotes ressentent l'envie de piloter un jour une...

Prix 320,00 €
Détails
En vente sur demande

Référence: 404/31

Jeu 4-pales 1600 mm

Commentaire(s): 0

Specification4-blade-setlength: 725 mmrotor disc: 1600 mmblade root: 14 mm 2-holeblade chord: 53 mmprofile thickness: 6.8 mmweight: ca. 175 gmaterial: CFRPShark Skin finish: anthracite mattsymmetry: reflex l.h.r.

Prix 443,90 €
Détails
En vente sur demande

Référence: 70/50

Tringle 2,5 x 50 mm

Commentaire(s): 0

Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Content of the package: 1 piece

Prix 5,40 €
Détails
En vente sur demande

Référence: 68/20

Swashplate driver 10 mm

Commentaire(s): 0

Where a pitch compensator sits and two pushrods connect to the flybar, this is now a swashplate driver in its place.This is necessary to drive the inner ring of the swashplate in order to always control the blade angle in the same position.Aluminium swashplate driver with 4 ballraces.

Prix 87,20 €
Détails
En vente sur demande

Référence: 34/30

Tail rotor blades 130 mm

Commentaire(s): 0

Tail rotor bladesSpecification 8.0 mm blade root8.7 g approx.29 mm blade chord5.0 mm profile thicknesssymmetrical130 mm longbalanced1 pair

Prix 75,60 €
Détails
En vente sur demande

Référence: 995

RC system accessories incl. 5 servos

Commentaire(s): 0

If you already own a radio control system and then purchase a second model helicopter, the next step is to consider carefully which electronic components are the best choice for the new model.The combination illustrated here comprises accessories which have proved excellent in practice. RC system accessories, with Futaba BLS 452 servos excluding radio...

Prix 529,90 €
Détails
En vente sur demande

Référence: 14/66

Car sticker BO 105 silver

Commentaire(s): 0

Car stickers show everyone immediately that you are a member of the helicopter scene. These stickers are factory-trimmed, and make it possible to transfer only the finely cut lines onto the base surface you have choosen. The stickers adhere very well, and do not fade.Color: silverSize approx. 80 x 200 mm

Prix 30,60 €
Détails
En vente sur demande
16 otros productos en la misma categoría:

Referencia: 9500.e

Kit de Fuselaje Exec electrico

Reseña(s): 0

El Exec es otro gran modelo de Vario. Siguiendo la tendencia actual, este helicóptero está diseñado para nuestros mecánicos eléctricos. Un marco de madera, que se atornilla en el fuselaje, tiene capacidad para la mecánica. El tubo de cola es desmontable, y está fijado al fuselaje por una fijación de tornillo central. El interior de la cabina opcional es,...

Precio 1.435,00 €
Más
En venta bajo pedido

Suivez-nous sur Facebook