Marques

No brand

Fournisseurs

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Motor mount aluminium for Silence

808/59
Note 

Not available

50,50 €
TTC
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

Not available

Détails du produit
808/59
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Motor mount aluminium for Silence

Motor mount aluminium for Silence

Not available

Donnez votre avis
16 autres produits dans la même catégorie :

Référence: 52/20

Swashplate guide

Commentaire(s): 0

The swashplate guide prevents the outer ring of the swashplate rotating; the swashplate pin runs in the slot in this guide. The part is fixed to the dome plate using M 3 socket-head cap screws. The length of the swashplate guide slot allows generous collective pitch travels to be exploited to the full; its position on the rotor shaft can be adjusted to...

Prix 14,70 €
Détails
En vente sur demande

Référence: 68/31

Swashplate 10 mm

Commentaire(s): 0

All swashplates (made of aluminium) are fitted with high-quality bearings and are designed for use with 2-blade, 3-blade and 4-blade rotor heads, while the outer swash-plate ring is designed for 3- and 4-point linkages.The swashplate disc can be controlled by 4 ball-end bolts at 90° or by 3 ball-end bolts at 120°, whether the linkage is direct to the...

Prix 108,30 €
Détails
En vente sur demande

Référence: 68/14

3-D swashplate 10 mm

Commentaire(s): 0

This swashplate provides longer ball-end bolts on the inner ring for larger control travels, as required for 3-D flying.

Prix 108,30 €
Détails
En vente sur demande

Référence: 68/20

Swashplate driver 10 mm

Commentaire(s): 0

Where a pitch compensator sits and two pushrods connect to the flybar, this is now a swashplate driver in its place.This is necessary to drive the inner ring of the swashplate in order to always control the blade angle in the same position.Aluminium swashplate driver with 4 ballraces.

Prix 87,20 €
Détails
En vente sur demande

Référence: 52/10

Swashplate guide black

Commentaire(s): 0

For Schweizer 300 (Ord.No. 6031), Hughes 500 (Ord.No. 9005) and Agusta (Ord.No. 9020). Height of the slot 47.0 mm for use with the rotor shaft 35/39.

Prix 14,70 €
Détails
En vente sur demande

Référence: 68/15

Swashplate 5-blade

Commentaire(s): 0

The swashplate disc can be controlled by 4 ball-end bolts at 90° or by 3 ball-end bolts at 120°, whether the linkage is direct to the servos or utilises bellcranks. As standard there are 4 linkage points.In both types the swashplate bolt assumes the additional function of one linkage point. For a 120° linkage the ball-end bolts have to be replaced with...

Prix 131,70 €
Détails
En vente sur demande

Suivez-nous sur Facebook