Kit for lowering the tail output, X-Treme

Reference: 870/2

RC frame, GFK, for X-Treme

Not available

Reference: 44/58

Gear 52-tooth

The combination of 52 : 32 teeth is used for the Sky Fox Boxer model, driven by a 4-stroke boxer motor with 2 x 13.26 cc capacity. 2-stroke glow plug engines (which are fitting our models because of performance and dimensions), don't achieve a satisfying result with this gear ratio.The illustration shows a symbol with the number of teeth of the main gear....

Reference: 833/44

Toothed belt pulley 55-tooth 3M

Toothed belt pulley 55-tooth.

Reference: 44/45

Gear 58-tooth

Gear 58-tooth Delrin The illustration shows a symbol with the number of teeth of the main gear. The number next to the back slash shows the number of teeth for the appropriate clutch and the resulting gear ratio.

Reference: 44/52

Gear 52-tooth

Gear 52-tooth GRP The illustration shows a symbol with the number of teeth of the main gear. The number next to the back slash shows the number of teeth for the appropriate clutch and the resulting gear ratio.

Reference: 870/53

Bearing plate, GFK

Not available

Reference: 809/200

SkyFox side frames with cooling duct

Not available

Reference: 809/50

SkyFox left side frame

Not available

Reference: 1006/9

Main gear box with freewheel

If you require a driven tail rotor for auto-rotation, the main gear hub must be fitted with a freewheel; the freewheel on the main rotor shaft then needs to be replaced by a fixed hub mounted on the main rotor shaft.Main gearbox incl. freewheel for driven tail rotor for auto-rotation landings; kit-form. The pinion shaft 41/25 supplied is only suitable for...

Reference: 37/11

Gearbox cover

Gearbox cover for gearbox housing Ord.No. 37/10, alone.

Reference: 4/30

90° Nippel mit Zollgewinde

Reference: 870/50

Front vertical frame, X-Treme

Not available

Reference: 4/7

Mechanics mount, X-Treme

Not available

Reference: 870/52

longitudinal carrier, GFK

Not available

Reference: 37/10

Gearbox housing incl cover

Even though the main gearbox is placed in the centre of the mechanics it is easily accessible for maintenance. For visual checks of gear meshing clearance, and for greasing the main gearbox it is provided with a gearbox cover.

Reference: 871/2

Servo plate CFK for throttle Servo, X-Treme

Not available