

No brand
Référence: 2017 E
Référence: 97/4
When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only). When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod...
This swashplate provides longer ball-end bolts on the inner ring for larger control travels, as required for 3-D flying.
Política de seguridad
Política de envío
Política de devolución
This swashplate provides longer ball-end bolts on the inner ring for larger control travels, as required for 3-D flying.
Aucun avis n'a été publié pour le moment.
Riferimento: 268/55
Swashplate driver for 15 mm Ø rotor shaft.
Riferimento: 101/49
Spacer for four-bladed control bridge Ord.No. 101/48
Riferimento: 68/20
Where a pitch compensator sits and two pushrods connect to the flybar, this is now a swashplate driver in its place.This is necessary to drive the inner ring of the swashplate in order to always control the blade angle in the same position.Aluminium swashplate driver with 4 ballraces.
Riferimento: 268/68
Swashplate for 15 mm Ø rotor shaft.
Riferimento: 52/20
The swashplate guide prevents the outer ring of the swashplate rotating; the swashplate pin runs in the slot in this guide. The part is fixed to the dome plate using M 3 socket-head cap screws. The length of the swashplate guide slot allows generous collective pitch travels to be exploited to the full; its position on the rotor shaft can be adjusted to...
Riferimento: 68/52
Swashplate driver, especially for a 5-blade rotor head. "for 12 mm main rotor shaft"
Riferimento: 68/100
Swashplate set for conversion from 10 mm to 12 mm
Riferimento: 68/31
All swashplates (made of aluminium) are fitted with high-quality bearings and are designed for use with 2-blade, 3-blade and 4-blade rotor heads, while the outer swash-plate ring is designed for 3- and 4-point linkages.The swashplate disc can be controlled by 4 ball-end bolts at 90° or by 3 ball-end bolts at 120°, whether the linkage is direct to the...
This swashplate provides longer ball-end bolts on the inner ring for larger control travels, as required for 3-D flying.