Marques

No brand

Référence: 97/4

Servo linkage set

Commentaire(s): 0

When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only). When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod...

Prix 40,10 €
Détails
En vente sur demande
Toutes les meilleures ventes

BENZIN Acrobatic

8303
Note 
Diamètre
Motor Extras
Éléments de sécurité
2 199,50 €
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Détails du produit
8303

Fiche technique

Longueur
1550 / 1630 mm
Le poids
6,2 kg
Largeur
520 mm
Hauteur
200 mm
Diamètre du rotor
1630 / 1780 mm
Motorization
Burnings
Documents joints
Téléchargement
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

BENZIN Acrobatic

BENZIN Acrobatic

Donnez votre avis
Vous aimerez aussi

Référence: 830/68

Filtre à essence, mailles fines

Commentaire(s): 0

Chemical analysis used in Formel 1 is able to determine 1 g of impurity within 1 ton of oil. To fulfill your demand on the cleanness of the fuel for your model helicopter you use the fine-mesh petrol filter inside the fuel tubing between the tank and the carburettor. Also suitable for kerosine turbine fuel.

Prix 21,80 €
Détails
En vente sur demande

Référence: 830/83

Durite d'essence 1m

Commentaire(s): 0

Fuel tubing for petrolapprox. 1 mtransparentFuel tubing inevitably suffers from the effects of ageing. Always replace brittle tubing before it gives problems! 

Prix 9,70 €
Détails
En vente sur demande

Référence: 830/101

Electric Benzin Conversion Kit, 6mm shaft

Commentaire(s): 0

Benzin-Trainer to electric conversion?..why not! Here is a rather simple way to convert your Benzin Trainer to electric power. Remove the Petrol motor and exhaust and replace it with an electric motor of your choice. The motor mount retrofit set can be used with the most common electric motors. This conversion set can also be used with the Benzin fuselage...

Prix 75,80 €
Détails
En vente sur demande

Référence: 1022/13

Carburettor intake trumpet

Commentaire(s): 0

This screw-fitting carburettor intake trumpet is designed to improve the flow of air entering the carburettor. Complete with screws and gasket.

Prix 29,80 €
Détails
En vente sur demande

Référence: 830/3

Cooling fan puller for the G230 petrol engine

Commentaire(s): 0

If you wish to install an electric on-board starter on a petrol engine, you will need to remove the existing cooling fan and replace it with a different one. The fan can only be removed using a puller.If you don't have the right tool, removing the fan often turns out to be a difficult task.We have designed the fan puller specifically for this purpose, so...

Prix 29,80 €
Détails
En vente sur demande
4 otros productos en la misma categoría: