

No brand
Référence: 2017 E
Référence: 34/30
Tail rotor bladesSpecification 8.0 mm blade root8.7 g approx.29 mm blade chord5.0 mm profile thicknesssymmetrical130 mm longbalanced1 pair
Référence: 10/90
The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...
Motor mount not drilled
pack of 2
Política de seguridad
Política de envío
Política de devolución
Motor mount not drilled
pack of 2
Aucun avis n'a été publié pour le moment.
Reference: 59/9
Motor mount for electric motors for installation in the model Silence.
Reference: 10/50
To protect your engine effectively against dust you should close the exhaust port after unscrewing the manifold with a dust guard cover at once.Dust guard cover pack of 2 34 - 35 mm hole spacing
Reference: 10/51
To protect your engine effectively against dust you should close the exhaust port after unscrewing the manifold with a dust guard cover at once.Dust guard cover pack of 2 42 mm hole spacing
Reference: 59/2
Factory-drilled motor mounts, already drilled and tapped for M 3 or M 4, are available in pairs (left / right). Avoid interchanging the left hand with the right hand one!1 pairfactory-drilled
Reference: 59/0
Spacer washer for motor mount 3,0 x 12 mm pack of 4
Reference: 59/18
For the model X-Perience (Ord.No. 8600) the thicker engine spacers are required.Engine spacer set2 each 0.5 and 1.0 mm
Reference: 59/3
Factory-drilled motor mounts, already drilled and tapped for M 3 or M 4, are available in pairs (left / right). Avoid interchanging the left hand with the right hand one!1 pairfactory-drilled
Reference: 860/59
These motor supports fit all models and mechanics of the X-Perience series independent from the type of engines.Motor support X-Periencepack of 2
Reference: 59/20
To obtain the optimum clearance between clutch pinion and main gear you can use these shim spacers, which are 0.1 and 0.2 mm thick. Simply loosen the engine retaining screws and place the appropriate shim spacer between engine and engine mount; suits all types of engine.Engine spacer set2 each 0.1 mm and 0.2 mm thick
Reference: 802/59
2-part bottom mount for for the model helicopter Boxer.
Reference: 59/5
Factory-drilled motor mounts, already drilled and tapped for M 3 or M 4, are available in pairs (left / right). Avoid interchanging the left hand with the right hand one!1 pairfactory-drilled
Motor mount not drilled
pack of 2