Accueil
Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Kevlartank para Queroseno 1.4 l

26/60
Note 

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.

These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop.

When ordering, one tank is supplied.

When mounting the lid, please fix the screws cross-wise using blue loctite until you have slight pressure on the rubber ring.

Dimensions: 240x210x80mm

This size, e.g. is suitable for the Vario BO 105, Ord.No. 6005.

388,60 €
TTC
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.

These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop.

When ordering, one tank is supplied.

When mounting the lid, please fix the screws cross-wise using blue loctite until you have slight pressure on the rubber ring.

Dimensions: 240x210x80mm

This size, e.g. is suitable for the Vario BO 105, Ord.No. 6005.

Détails du produit
26/60
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Kevlartank para Queroseno 1.4 l

Kevlartank para Queroseno 1.4 l

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.

These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop.

When ordering, one tank is supplied.

When mounting the lid, please fix the screws cross-wise using blue loctite until you have slight pressure on the rubber ring.

Dimensions: 240x210x80mm

This size, e.g. is suitable for the Vario BO 105, Ord.No. 6005.

Donnez votre avis
16 autres produits dans la même catégorie :
Filtre à essence, mailles... Aperçu rapide

Référence: 830/68

Filtre à essence, mailles fines

Commentaire(s): 0

Chemical analysis used in Formel 1 is able to determine 1 g of impurity within 1 ton of oil. To fulfill your demand on the cleanness of the fuel for your model helicopter you use the fine-mesh petrol filter inside the fuel tubing between the tank and the carburettor. Also suitable for kerosine turbine fuel.

Prix 25,10 €
Détails
En vente sur demande
Réservoir 540 cm³ pour... Aperçu rapide

Référence: 830/27

Réservoir 540 cm³ pour kérosène

Commentaire(s): 0

Tank 540 ml, kerosene-resistantincluding accessories complying the special request of the contact with keroseneThe CofG of a model helicopter should only be checked with an empty fuel tank.During the flight the fuel is situated in a place where the additional weight does not have an adverse effect. If you set the CofG with a full fuel tank the resultant...

Prix 37,50 €
Détails
En vente sur demande
Station de remplissage,... Aperçu rapide

Référence: 3720

Station de remplissage, contenu 3 l

Commentaire(s): 0

This refuelling station for petrol helicopters consists of a petrol-proof container of 3 litres capacity, a hand-pump for filling and emptying, fittings and filler hose.

Prix 75,60 €
Détails
En vente sur demande

Suivez-nous sur Facebook

Facebook