Fuel tank clunk big

Référence: 641/26

Réservoir Air-Crane, en GFK, version pour réacteur

Component part for fuselage Air-Crane, Ord.No. 6410

Référence: 830/83

Durite d'essence 1m

Fuel tubing for petrolapprox. 1 mtransparentFuel tubing inevitably suffers from the effects of ageing. Always replace brittle tubing before it gives problems! 

Référence: 13/32

Systéme de remplissage pour kérosène

The kerosene refuelling system is sealed with a rubber nipple. The constant low pressure inside the tank draws the nipple firmly against the refuelling opening. That is also the reason why a mechanism such as a spring-controlled valve is not suitable, because the low pressure tends to push the spring back as spring tension diminishes.

Référence: 830/27

Réservoir 540 cm³ pour kérosène

Tank 540 ml, kerosene-resistantincluding accessories complying the special request of the contact with keroseneThe CofG of a model helicopter should only be checked with an empty fuel tank.During the flight the fuel is situated in a place where the additional weight does not have an adverse effect. If you set the CofG with a full fuel tank the resultant...

Référence: 26/7

Réservoir pour Kérosène 2,5 l

Tank for kerosene 2500 mlDimensions of bottle: 28.5 x 12 x 8 cm

Référence: 791/26

Réservoir pour Kérosène 1,5 l

Kerosene Tank 1.5 l, GRP, with accessories, for Cobra with Turbine

Référence: 26/100

Benzin kit incl. fuel tank 540 ccm

Not available

Référence: 140/26

Kerosintank AW 139

Not available

Référence: 860/26

Tank 540 ccm für Methanol

Référence: 10/66

Absperrhahn mit Feinsieb für Methanol

Référence: 605/26

Réservoir pour BO 105

Kerosene Tank 3.3 l, GRP, with accessories, for BO 105 with Turbine.

Référence: 206/26

Réservoir de kérosène 2,2 l, Turbine UH-1

Kerosene Tank 2.2 l, GRP, with accessories, for UH-1D with Turbine

Référence: 3721

Pompe à carburant

Geared pumpfor petrol, kerosene and methanolwith accessories

Référence: 26

Tank 500 ccm Benzin/Methanol

Référence: 3720

Station de remplissage, contenu 3 l

This refuelling station for petrol helicopters consists of a petrol-proof container of 3 litres capacity, a hand-pump for filling and emptying, fittings and filler hose.

Référence: 26/34

Collier essence - kérosène

Fuel tubing is required to withstand many kinds of thermal and chemical stress, i.e. it has to be resistant to petrol and kerosene whilst maintaining maximum flexibility. However, it must also be possible to fix the tubing reliably to tubes and nipples; the more valuable the model, the more important it becomes to fix the fuel tubing with absolute...