Prise de remplissage M5, coudée

Référence: 26/50

Réservoir en Kevlar 1.4 l pour Kérosène et pétrole

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside. These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop. They fit in every fuselage, that would normally use the plastic tank Ord.No. 26/5 for. For example, this Aramid tank is...

Référence: 26/20

Pendelsieb für Methanol

Référence: 830/83

Durite d'essence 1m

Fuel tubing for petrolapprox. 1 mtransparentFuel tubing inevitably suffers from the effects of ageing. Always replace brittle tubing before it gives problems! 

Référence: 13/25

Válvula de llenado para metanol y bencina

Référence: 3740

Station de carburant, kérosène 10 l

Any turbine-powered model has to carry a very large quantity of fuel, and this in turn calls for a fuel station of ample volume.The VARIO filler station has a capacity of 10 litres and is ideal for flying sessions.The fueltank is filled and drained using a practical geared pump, which is permanently mounted on the fuel container.

Référence: 26/34

Collier essence - kérosène

Fuel tubing is required to withstand many kinds of thermal and chemical stress, i.e. it has to be resistant to petrol and kerosene whilst maintaining maximum flexibility. However, it must also be possible to fix the tubing reliably to tubes and nipples; the more valuable the model, the more important it becomes to fix the fuel tubing with absolute...

Référence: 830/26

Réservoir 540 cm³ pour essence

Tank 540 ml, petrol-resistantincluding the requested accessories for installation in a Benzin-Trainer or in a petrol mechanics.The CofG of a model helicopter should only be checked with an empty fuel tank.During the flight the fuel is situated in a place where the additional weight does not have an adverse effect. If you set the CofG with a full fuel...

Référence: 791/26

Réservoir pour Kérosène 1,5 l

Kerosene Tank 1.5 l, GRP, with accessories, for Cobra with Turbine

Référence: 10/82-50

Schlauch für Methanol 50 mOrd.No. 10/82-50

Référence: 800/26

Tank 540 ccm für Methanol

Référence: 26/25

Filtre pour prise d'air du réservoir

Tank vent filter, to prevent dirt and other foreign objects from entering fuel supply.

Référence: 116/5

Prise de remplissage ou de pressurisation M5

Content of the packag: 1 piececomplete as shown

Référence: 860/26

Tank 540 ccm für Methanol

Référence: 26/70

Réservoir en Kevlar 2.8 l pour Kérosène et pétrole

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.These fuel tanks are all tested with air pressure on leaks to make sure that they are 100% leak-proof, when they arrive at your workshop. They fit in the Vario turbine Ecureuil fuselage, that we recommend the plastic tank Ord.No. 26/7 for.When...

Référence: 26/13

Fuel tank clunk big

Not available

Référence: 834/26

Tank 540 ccm für Benzin