Réservoir pour Kérosène 2,5 l pour JetRanger PHT-3

Référence: 26/11

O-Ringe für Tank 26/10, 1x4mm für Methanol

Référence: 26/3

Tank 300 ccm für Methanol/Benzin

Référence: 10/82-50

Schlauch für Methanol 50 mOrd.No. 10/82-50

Référence: 26/32

Schlauchsicherung für Methanol

Référence: 3741

support de Pompe a carburant

Separate pump holder and hand wind pump, suitable for fitting to the 10 L fuel container.

Référence: 26/50

Réservoir en Kevlar 1.4 l pour Kérosène et pétrole

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside. These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop. They fit in every fuselage, that would normally use the plastic tank Ord.No. 26/5 for. For example, this Aramid tank is...

Référence: 830/27

Réservoir 540 cm³ pour kérosène

Tank 540 ml, kerosene-resistantincluding accessories complying the special request of the contact with keroseneThe CofG of a model helicopter should only be checked with an empty fuel tank.During the flight the fuel is situated in a place where the additional weight does not have an adverse effect. If you set the CofG with a full fuel tank the resultant...

Référence: 26/1

Bouchon de durite

Fuel tubing plug pack of 3

Référence: 26/10

Zusatztank, ca. 68 ccm für Methanol

Référence: 791/26

Réservoir pour Kérosène 1,5 l

Kerosene Tank 1.5 l, GRP, with accessories, for Cobra with Turbine

Référence: 26/4

Tank 400 ccm Benzin/Methanol

Référence: 412/26

Réservoir pour Kérosène 2 l pour Bell 412

dimensions: approx. 38.5 x 18 x 4.5 cm (height of the nose: 9 cm)

Référence: 3740

Station de carburant, kérosène 10 l

Any turbine-powered model has to carry a very large quantity of fuel, and this in turn calls for a fuel station of ample volume.The VARIO filler station has a capacity of 10 litres and is ideal for flying sessions.The fueltank is filled and drained using a practical geared pump, which is permanently mounted on the fuel container.

Référence: 3720

Station de remplissage, contenu 3 l

This refuelling station for petrol helicopters consists of a petrol-proof container of 3 litres capacity, a hand-pump for filling and emptying, fittings and filler hose.

Référence: 10/66

Absperrhahn mit Feinsieb für Methanol

Référence: 26/2

Bouchon en caoutchouc

Rubber cap useful to seal fuel lines on the pit box or fuel tank nipples pack of 4