Réservoir intérieur pour Cobra 2,2 l

Reference: 26/32

Schlauchsicherung für Methanol

Reference: 13/32

Kerosene refuelling system

The kerosene refuelling system is sealed with a rubber nipple. The constant low pressure inside the tank draws the nipple firmly against the refuelling opening. That is also the reason why a mechanism such as a spring-controlled valve is not suitable, because the low pressure tends to push the spring back as spring tension diminishes.

Reference: 26/1

Fuel tubing plug

Fuel tubing plug pack of 3

Reference: 830/26

Tank 540 ml for petrol

Tank 540 ml, petrol-resistantincluding the requested accessories for installation in a Benzin-Trainer or in a petrol mechanics.The CofG of a model helicopter should only be checked with an empty fuel tank.During the flight the fuel is situated in a place where the additional weight does not have an adverse effect. If you set the CofG with a full fuel...

Reference: 26/7

Tank for kerosene 2.5 l

Tank for kerosene 2500 mlDimensions of bottle: 28.5 x 12 x 8 cm

Reference: 3741

Separate pump holder and hand wind pump

Separate pump holder and hand wind pump, suitable for fitting to the 10 L fuel container.

Reference: 26

Tank 500 ccm Benzin/Methanol

Reference: 791/26

Kerosin Tank 1.5 l, Turbine Cobra

Kerosene Tank 1.5 l, GRP, with accessories, for Cobra with Turbine

Reference: 10/82-100

Schlauch für Methanol 100 mOrd.No. 10/82-100

Reference: 10/82-10

Schlauch für Methanol 10 mOrd.No. 10/82-10

Reference: 3740

Kerosene fuel station, 10 l.

Any turbine-powered model has to carry a very large quantity of fuel, and this in turn calls for a fuel station of ample volume.The VARIO filler station has a capacity of 10 litres and is ideal for flying sessions.The fueltank is filled and drained using a practical geared pump, which is permanently mounted on the fuel container.

Reference: 26/3

Tank 300 ccm für Methanol/Benzin

Reference: 830/83

Petrol fuel tubing 1 m

Fuel tubing for petrolapprox. 1 mtransparentFuel tubing inevitably suffers from the effects of ageing. Always replace brittle tubing before it gives problems! 

Reference: 412/26

Fuel tank for Kerosene 2 l for Bell 412

dimensions: approx. 38.5 x 18 x 4.5 cm (height of the nose: 9 cm)

Reference: 26/11

O-Ringe für Tank 26/10, 1x4mm für Methanol

Reference: 26/70

Kevlartank for Kerosene 1.4 l

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.These fuel tanks are all tested with air pressure on leaks to make sure that they are 100% leak-proof, when they arrive at your workshop. They fit in the Vario turbine Ecureuil fuselage, that we recommend the plastic tank Ord.No. 26/7 for.When...