

No brand
Référence: 2017 E
Référence: 34/30
Tail rotor bladesSpecification 8.0 mm blade root8.7 g approx.29 mm blade chord5.0 mm profile thicknesssymmetrical130 mm longbalanced1 pair
Référence: 10/90
The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...
Política de seguridad
Política de envío
Política de devolución
Aucun avis n'a été publié pour le moment.
Riferimento: 603/18
Component part for fuselages, Ord.No. 6030 or 6031.
Riferimento: 800/9
PTFE guides in the tail boom provide the necessary "lubrication" for the drive shaft, which eliminates the need to oil the system separately.PTFE guide for 0.8 mm tail boomPack of 3
Riferimento: 105/14
Stainless steel tube 8.0 mm2-part (462 mm + 1160 mm)
Riferimento: 17/16
Advanced pilots appreciate the more precise control response of a rigid tail rotor drive system, as provided by a stainless steel drive shaft. Stainless steel tube 6.0 x 0.3 x 950 mm
Riferimento: 17/7
The use of an articulated centre support in helicopters with extreme high mounted tail booms (e.g. Hughes 500) helps to balance up to 30 mm vertical off-set between mechanics and tail rotor. The centre support is double ballraced and pre-assembled.
Riferimento: 17/55
Stainless steel drive for installationin models with 40° angle gearboxcomplete as shown
Riferimento: 17/17
Connecting plug for ø 6 mm tubePack of 2
Riferimento: 17/20
This version of the ballraced tail rotor drive system is designed for installation in full-fuselage models. Power is transmitted by a 6 mm stainless steel drive shaft with a length of 980 mm.This length ensures that the system can be used in virtually all our larger fuselages, provided that the main and tail rotors are fitted with the articulated...
Riferimento: 17
The 2 mm steel tail rotor shaft has proved its worth for several decades, especially in beginners' models.Drive shaft, steel, 2.0 x 980 mm
Riferimento: 17/8
Connecting plug for stainless steel tube 8 mm pack of 2
Riferimento: 17/13
On a model helicopter like the Hughes 500 e.g. the tail boom is extremely high connected. Therefore an articulated centre support is applied in addition to the articulated tail drive system. The centre support is double ballraced and pre-assembled.Articulated joint tail drive systemwith articulated centre support
Riferimento: 603/17
Component part for fuselages, Ord.No. 6030 or 6031.
Riferimento: 17/9
Centre bearing for lattice fuselage Alouette II and Bell 47
Riferimento: 17/15
Stainless steel tube 6.0 x 0.3 x 890 mm
Riferimento: 17/14
Of course the explanation of Ord.No. 17/10 concerning a 2 mm steel drive wire in acrobatics applies not only for fuselages, it is similar for training helicopters.When you convert a trainer you use the existing tail boom. Main gearbox and tail gearbox have to be provided with a claw connector 49/12 each.Models over a certain age should be checked whether...