Marques

No brand

Référence: 97/4

Servo linkage set

Commentaire(s): 0

When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only). When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod...

Prix 40,10 €
Détails
En vente sur demande
Toutes les meilleures ventes

Chapes à boules 2,5 mm

107/9
Note 



Ball-links must be flexible but adequately rigid. The threaded part of the rod cuts its own thread in the ball-link, and no further fixing is necessary. Use silicone oil, Order No. 10/37, for maintenance.

  • Pack of
10Connector fits 4.8 mm ��balls

How do you know when the pushrod meets the end of the socket, and does it becomes screwed to far into the ball-link accidentially? These ball-links feature a check slot, so you just screw in the pushrod until the end is visible.

7,30 €
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description



Ball-links must be flexible but adequately rigid. The threaded part of the rod cuts its own thread in the ball-link, and no further fixing is necessary. Use silicone oil, Order No. 10/37, for maintenance.

  • Pack of
10Connector fits 4.8 mm ��balls

How do you know when the pushrod meets the end of the socket, and does it becomes screwed to far into the ball-link accidentially? These ball-links feature a check slot, so you just screw in the pushrod until the end is visible.

Détails du produit
107/9
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Chapes à boules 2,5 mm

Chapes à boules 2,5 mm



Ball-links must be flexible but adequately rigid. The threaded part of the rod cuts its own thread in the ball-link, and no further fixing is necessary. Use silicone oil, Order No. 10/37, for maintenance.

  • Pack of
10Connector fits 4.8 mm ��balls

How do you know when the pushrod meets the end of the socket, and does it becomes screwed to far into the ball-link accidentially? These ball-links feature a check slot, so you just screw in the pushrod until the end is visible.

Donnez votre avis
16 autres produits dans la même catégorie :

Référence: 060/18

Axe à rotule 5,0 mm - M3,0x3,0

Commentaire(s): 0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Prix 7,30 €
Détails
En vente sur demande

Référence: 060/20

Axe à rotule 3,0 mm - M3,5x7,5

Commentaire(s): 0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Prix 7,30 €
Détails
En vente sur demande

Référence: 060/8

Axe à rotule 3,0 mm - M3,0x9,0

Commentaire(s): 0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Prix 7,30 €
Détails
En vente sur demande

Référence: 060/14

Axe à rotule 9,5 mm - M3,0 x 3,0

Commentaire(s): 0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Prix 7,30 €
Détails
En vente sur demande

Référence: 107/15

Chape à boules 3,0 mm

Commentaire(s): 0

It is advisable to use stronger pushrods and balls with a larger diameter on demand. This combination often is selected by the pilots with airplanes as well.Ball-link for 3.0 mm pushrodpack of 10connector fits 5.5 mm ��balls

Prix 7,30 €
Détails
En vente sur demande

Référence: 107/25

Chapes à boules 2,5 mm avec rlts.

Commentaire(s): 0

Ballraced joints respond much more readily to the slightest control movement of servos, mixer levers etc. Instead of the ball in the ball-link there is a 2 x 5 x 2.3 mm ballrace, secured with an M 2 socket-head cap screw. These ball-links are designed to fit 2.5 mm diameter pushrods. Select appropriate retaining screws according to the...

Prix 28,10 €
Détails
En vente sur demande

Référence: 060

Axe à rotule 3,5 mm - M2,0x5,0

Commentaire(s): 0

These ball-end bolts offer an optimal connection between a GRP servo output arm and the pushrod to the mechanics. Underneath the output arm you lock the ball-end bolt with an M 2 hexagon nut. For aluminium output arms you use ball-end bolts Ord.No. 060/7 and thread-lock fluid.

Prix 16,90 €
Détails
En stock

Référence: 060/15

Axe à rotule 3,5 mm - M2,0x3,5

Commentaire(s): 0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Prix 7,30 €
Détails
En vente sur demande

Référence: 060/10

Axe à rotule 3,5 mm - M2,5x3,0

Commentaire(s): 0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Prix 7,30 €
Détails
En vente sur demande

Référence: 060/19

Axe à rotule 11,0 mm - M3,0x3,0

Commentaire(s): 0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Prix 7,30 €
Détails
En vente sur demande

Référence: 060/5

Axe à rotule 20,0 mm - M3,0x7,0

Commentaire(s): 0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Prix 7,30 €
Détails
En vente sur demande

Référence: 060/29

Axe à rotule 5,0mm - M4,0x6,0

Commentaire(s): 0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Prix 7,30 €
Détails
En vente sur demande

Référence: 107/8

Chapes à boules 2,0 mm

Commentaire(s): 0

Ball joints for 2.0 mm thread are only applied at the tail rotor if the one piece control bridge Ord.No 100 is used. Contend of the package: 10 pieces.

Prix 7,30 €
Détails
En vente sur demande