Axe à rotule 3,0 mm - M3,0x9,0

Référence: 107/34

Chapes à boules 3,0 mm

We can supply large ball-links for M3 pushrods separately, for installation in your own projects. The length of the link is 22 mm, and its linkage ball is designed to accept an M3 machine screw. The largest diameter of the link is 13 mm.M3 ball-linkpack of 2

Référence: 107/17

Ball-links 2.5 mm

Référence: 060

Axe à rotule 3,5 mm - M2,0x5,0

These ball-end bolts offer an optimal connection between a GRP servo output arm and the pushrod to the mechanics. Underneath the output arm you lock the ball-end bolt with an M 2 hexagon nut. For aluminium output arms you use ball-end bolts Ord.No. 060/7 and thread-lock fluid.

Référence: 060/15

Axe à rotule 3,5 mm - M2,0x3,5

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Référence: 060/19

Axe à rotule 11,0 mm - M3,0x3,0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Référence: 060/9

Axe à rotule 8,0 mm - M 3,5 x 3,0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Référence: 107/8

Chapes à boules 2,0 mm

Ball joints for 2.0 mm thread are only applied at the tail rotor if the one piece control bridge Ord.No 100 is used. Contend of the package: 10 pieces.

Référence: 107/9

Chapes à boules 2,5 mm

Ball-links must be flexible but adequately rigid. The threaded part of the rod cuts its own thread in the ball-link, and no further fixing is necessary. Use silicone oil, Order No. 10/37, for maintenance.Pack of 10Connector fits 4.8 mm ��ballsHow do you know when the pushrod meets the end of the socket, and does it becomes screwed to far into the...

Référence: 060/2

Axe à rotule 5,0 mm - M3,0x3,0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Référence: 80/21

Kit sécurisation chapes

Les chapes à boules sont très sollicitées, notamment lors des débattements importants tel qu'on les trouve sur les hélicoptères en vol 3-D. Elles s'élargissent avec le temps. Une...

Référence: 107/10

Chapes à boules 2,0 mm

Pack of 25

Référence: 060/24

Axe à rotule 10,0 mm - M3,0x9,0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Référence: 060/14

Axe à rotule 9,5 mm - M3,0 x 3,0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Référence: 107/23

Chapes à boules 2,5 mm pour rlts.

 Content of the package6 pieces

Référence: 107/15

Chape à boules 3,0 mm

It is advisable to use stronger pushrods and balls with a larger diameter on demand. This combination often is selected by the pilots with airplanes as well.Ball-link for 3.0 mm pushrodpack of 10connector fits 5.5 mm ��balls

Référence: 060/3

Axe à rotule 6,5 mm - M3,0x6,0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...